EnGenius Technologies EP-490 user manual Mute, Do Not Disturb Silent Ring, Key Guard

Page 18

Mute

1.After a link is established, you can press Mute (Left) soft key to mute the handset microphone.

2.When mute is active, the other end will not hear your voice, but still can speak to you.

3.To leave the mute state, press “Unmute” (Left) soft key.

Note: Mute is effective only for the current call. It is automatically turned off after the call is ended.

Do Not Disturb (Silent Ring)

1.Enter the key sequence MENU – Sounds – Ring Volume, then select “Off”. This will turn off the ringer until it is turn on again from the menu.

2.For temporary silencing the ringer when an incoming call arrives, press Silent (Left) soft key.

Key Guard

1.To prevent accidental dialing, you can press Menu (Right) soft key, then select KeyGuard option. The handset keypad is locked. No key entry is accepted except the power on/off key.

2.To unlock the keypad, press “Unlock” (Left) soft key, then, within 2 seconds, press the digit “1” to unlock.

3.Key Guard is in effect until unlocked or powered off.

Battery Recharge and Replacement

35

1.Charge the battery when one or several of the following happen:

a.Phone beeps twice every two seconds.

b.Battery icon is empty.

c.Phone does not respond when a key is pressed.

d.LCD and backlighting become dim.

e.Talk range shortfall is experienced.

2.You can replace the handset battery after placing the call-in-progress on hold.

3.Battery talk time and standby time vary depending on the talk/standby pattern and the operating distance. Putting the handset back to charger cradle as often as possible is recommended for best performance.

Note: Use only manufacturer provided batteries and charger.

36

Image 18
Contents Table of Contents EP-490Safety Instructions General Safety InstructionsProduct Safety Instructions Battery Safety Instructions Regulatory Information FCC ID NNA-EP-490Equipment Checklist CongratulationsVi Battery Strength Basic Handset FeaturesLine Indicator Handset IllustrationAdditional Handset Features TALK/FLASHPage Line Selection Base Illustration Base Features AntennaIi Auto-Attendant AA configuration On/Off, default = Off Additional Base Station FeaturesAdministrator Features Charger Illustration Charger Features Base Station InstallationGetting Started Handset and Charger Installation Making an Intercom Call Basic OperationsMaking a Telephone Call RedialEnding a Call Adjusting Receiver Earpiece Voice VolumeReceiving an Intercom Call Placing a Call On HoldDo Not Disturb Silent Ring Battery Recharge and ReplacementMute Key GuardAdvanced Operations Obtain a Specific Handset ID Handset Group SubscriptionWay Conferencing with a Second Handset Call TransferWay Conferencing Way Conferencing with a Second Phone LineCall Forwarding Auto-Attendant AAPage AA Configuration by Administrator Change AA ParametersChange System Settings by Administrator Phonebook OperationsTo add a new entry To search for a record To erase/edit phonebookMenu Operations Text Messaging Receiving a text message Viewing and editing outgoing text messagesSending a text message Viewing received text messagesTechnical Specifications MSK