EnGenius Technologies EP-490 user manual Talk/Flash, Additional Handset Features

Page 8

• Indicates charging when in charger cradle.

5.TALK/FLASH

a.Places or answers a telephone or intercom call.

b.Toggles between calls in built-in call waiting operations.

c.Sends a Flash signal to phone line to retrieve a dial tone after the call ends, or to perform the call waiting feature provided by local phone companies during a call.

6.2-WAY/INTERCOM

a.Places an intercom call to another handset ID or a group ID (group paging).

b.Intercom calls are digital, full duplex, and are conducted without the assistance from the base, thus leaving the base’s line handling capacity intact.

7.Ringer

a.Rings to an incoming call.

b.Distinctive alert sounds indicating various events:

i)Single Beep: successful key entry

ii)Double beep: failed operation or invalid key entry, also indicates power on/off

iii)Periodic 1-Long-2-Short Beep (every 1 minute): low battery warning

iv)Periodic Long Series of Beeps (repeat every 30 seconds): indicates a call is on-hold

8.Battery

9.Headset Jack

• 2.5 mm headset jack for hands-free operation

10.Left/Right Soft Keys

• Make menu selection.

15

11.Up/Down Scrolling Keys

a.Scroll through records and menu selections.

b.Adjust receiver voice volume when in Talk mode.

12.END Key

a.Ends a call.

b.Leaves current menu operation, up one level.

13.Power On/Off Key

Additional Handset Features

1.Up to 90 handsets and 99 Handset IDs

a.ID 10-99: individual Handset IDs. ID 10 and 11 are the first two ID’s assigned by the base and are designated “administrators” who can change base settings such as greeting message and other base administrative functions.

b.ID 01-09: Group IDs. Handsets can “subscribe” from the handset menu to group(s) and be paged when a landline caller or an intercom caller enters a Group ID.

2.Over-the-air handset registration

3.Security

• One of the 65,536 possible security codes is randomly selected by the base station during registration.

4.Ringer Vibrator

5.Call Waiting

a.Notifies handset the arrival of a 2nd call from another phone line.

b.Allows handset to toggle between 2 phone calls.

16

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Table of Contents EP-490Safety Instructions General Safety InstructionsProduct Safety Instructions Battery Safety Instructions Regulatory Information FCC ID NNA-EP-490Equipment Checklist CongratulationsBasic Handset Features Line IndicatorVi Battery Strength Handset IllustrationAdditional Handset Features TALK/FLASHPage Line Selection Base Illustration Base Features AntennaAdministrator Features Ii Auto-Attendant AA configuration On/Off, default = OffAdditional Base Station Features Charger Illustration Getting Started Charger FeaturesBase Station Installation Handset and Charger Installation Basic Operations Making a Telephone CallMaking an Intercom Call RedialAdjusting Receiver Earpiece Voice Volume Receiving an Intercom CallEnding a Call Placing a Call On HoldBattery Recharge and Replacement MuteDo Not Disturb Silent Ring Key GuardAdvanced Operations Obtain a Specific Handset ID Handset Group SubscriptionCall Transfer Way ConferencingWay Conferencing with a Second Handset Way Conferencing with a Second Phone LineCall Forwarding Auto-Attendant AAPage AA Configuration by Administrator Change AA ParametersTo add a new entry Change System Settings by AdministratorPhonebook Operations To search for a record To erase/edit phonebookMenu Operations Text Messaging Viewing and editing outgoing text messages Sending a text messageReceiving a text message Viewing received text messagesTechnical Specifications MSK
Top Page Image Contents