Canon 3920 manual Install the Base Unit Directly on a Wall, Insert Mounting Screws

Page 19

User’s Guide	2 Installing the Telephone

Install the Base Unit Directly on a Wall

This section provides procedures to mount the base unit directly on a wall if a standard wall plate is not installed. Use #10 screws and, if necessary, anchoring devices that are suitable for the wall material where the base unit will be placed.

! CAUTION:

Do not mount the base unit on the ceiling.

1Insert two mounting screws into the wall 3 and 15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the base unit.

Figure 9: Insert Mounting Screws

Install the Base Unit Directly on a Wall 19

Image 19

Contents Avaya 3920 Wireless Telephone Federal Communications Commission Statement Trademarks Important Safety Instructions Contents Troubleshooting Specifications Accessories Welcome IntroductionConventions OrganizationRelated Documents Introduction Overview Installing the TelephoneBase Unit Select Base Unit Location Connect Telephone Cord Install the Base Unit on a DesktopCheck to see that the power LED is on Attach Wall Mount Stand to Base Unit Install the Base Unit on a Standard Wall PlateLine In jack Adapter Insert Mounting Screws Install the Base Unit Directly on a WallLine In jack Place Base Unit on Wall Screw Posts Plug Telephone Cord into Telephone Jack Apply Power to Charger Unit Apply Power to the Charger UnitInsert Mounting Screws into Wall Mount the Charger Unit on a Wall OptionalRemove Battery Cover Install the Handset BatteryClose Battery Cover Place Handset in Charger Unit Charge the Battery for the First TimeCharge Spare Battery Charge the Spare BatteryUser’s Guide Install Headset Install a Headset OptionalBelt clip is designed to fit snugly onto the handset Attach the Belt Clip to the HandsetPress firmly until it snaps into place Remove Belt Clip from the Handset Remove the Belt Clip from the HandsetInstalling the Telephone About Your Telephone Handset Avaya 3920 Wireless Telephone HandsetButton Description Vol Handset Display Base Unit Base UnitCharger Unit Charger UnitClean Charger Unit Contacts Clean the Charger Unit ContactsLow Battery Indications BatteryAbout Your Telephone Handset Modes Using Your TelephoneMake a Call Handling CallsAnswer a Call Transfer a Call Make an Intercom CallAnswer an Intercom Call Place a Call on HoldMute a Conversation Conference a CallChange Earpiece Volume Changing Handset SettingsChange Ring Type and Volume Turn Ringer Off Set Vibrate ModeSet Silent Alert Set the End of Range Alarm Using Your Telephone Troubleshooting Wireless Telephone Planning Wireless Telephone Planning and Installation Installation Guide to change the confirmation Specifications Specifications Repeater Accessories Accessories