Canon 3920 manual Low Battery Indications

Page 43

User’s Guide

3 About Your Telephone

 

 

 

 

Battery

Your wireless telephone comes with one nickel-metal hydride rechargeable battery that provides up to 12 hours of talk time (fully charged).

Low Battery Indications

If the battery runs low while a call is in progress, the handset beeps once every three seconds.

If the battery is low while the telephone is in Standby Mode:

Handset beeps every 15 seconds for 3 minutes

None of the buttons operate

Handset cannot make or receive calls

Battery Charge icon indicates the current state of the handset’s battery. When the icon reduces to one bar, return the handset to the cradle or swap the battery with a charged one.

It is recommended that you have a spare battery always charging to ensure against complete battery discharge. See “Charge the Spare Battery” on page 28 for more information. To restore the battery capacity, return the handset to the charger unit for charging or replace the handset battery with a charged one. The battery can remain in the charger unit.

Battery 43

Image 43
Contents Avaya 3920 Wireless Telephone Federal Communications Commission Statement Trademarks Important Safety Instructions Contents Troubleshooting Specifications Accessories Welcome IntroductionConventions OrganizationRelated Documents Introduction Overview Installing the TelephoneBase Unit Select Base Unit Location Connect Telephone Cord Install the Base Unit on a DesktopCheck to see that the power LED is on Attach Wall Mount Stand to Base Unit Install the Base Unit on a Standard Wall PlateLine In jack Adapter Insert Mounting Screws Install the Base Unit Directly on a WallLine In jack Place Base Unit on Wall Screw Posts Plug Telephone Cord into Telephone Jack Apply Power to Charger Unit Apply Power to the Charger UnitInsert Mounting Screws into Wall Mount the Charger Unit on a Wall OptionalRemove Battery Cover Install the Handset BatteryClose Battery Cover Place Handset in Charger Unit Charge the Battery for the First TimeCharge Spare Battery Charge the Spare BatteryUser’s Guide Install Headset Install a Headset OptionalBelt clip is designed to fit snugly onto the handset Attach the Belt Clip to the HandsetPress firmly until it snaps into place Remove Belt Clip from the Handset Remove the Belt Clip from the HandsetInstalling the Telephone About Your Telephone Handset Avaya 3920 Wireless Telephone HandsetButton Description Vol Handset Display Base Unit Base UnitCharger Unit Charger UnitClean Charger Unit Contacts Clean the Charger Unit ContactsLow Battery Indications BatteryAbout Your Telephone Handset Modes Using Your TelephoneMake a Call Handling CallsAnswer a Call Transfer a Call Make an Intercom CallAnswer an Intercom Call Place a Call on HoldMute a Conversation Conference a CallChange Earpiece Volume Changing Handset SettingsChange Ring Type and Volume Turn Ringer Off Set Vibrate ModeSet Silent Alert Set the End of Range Alarm Using Your Telephone Troubleshooting Wireless Telephone Planning Wireless Telephone Planning and Installation Installation Guide to change the confirmation Specifications Specifications Repeater Accessories Accessories