Canon 3920 manual Troubleshooting

Page 53

A Troubleshooting

If your Avaya 3920 Wireless Telephone is not performing to your expectations, try the suggestions provided in the following table. If you are still unable to resolve the problem, contact your telephone System Administrator.

Do not attempt to service this unit yourself. All service must be done by qualified service personnel.

Condition

Suggestion

 

 

Indicator does

Make sure the AC adapter is plugged into the

not light when

charging cradle and wall outlet. If the AC

handset is

adapter is plugged into a wall outlet with a

placed in the

switch, make sure the switch is turned on.

charging cradle.

Make sure the handset is properly seated in

 

 

the charging cradle.

 

Make sure the battery is properly seated in the

 

handset.

 

Make sure that the charging contacts on the

 

handset and charging cradle are clean. Use a

 

soft dry cloth to clean contacts. Do not use

 

any liquids or solvents.

 

 

Conversation is

Move back within the system range limit (for

interrupted

example, move closer to the base unit or a

frequently.

repeater.) Consider installing a repeater if you

 

experience this condition frequently.

 

 

53

Image 53
Contents Avaya 3920 Wireless Telephone Federal Communications Commission Statement Trademarks Important Safety Instructions Contents Troubleshooting Specifications Accessories Welcome IntroductionConventions OrganizationRelated Documents Introduction Overview Installing the TelephoneBase Unit Select Base Unit Location Connect Telephone Cord Install the Base Unit on a DesktopCheck to see that the power LED is on Attach Wall Mount Stand to Base Unit Install the Base Unit on a Standard Wall PlateLine In jack Adapter Insert Mounting Screws Install the Base Unit Directly on a WallLine In jack Place Base Unit on Wall Screw Posts Plug Telephone Cord into Telephone Jack Apply Power to Charger Unit Apply Power to the Charger UnitInsert Mounting Screws into Wall Mount the Charger Unit on a Wall OptionalRemove Battery Cover Install the Handset BatteryClose Battery Cover Place Handset in Charger Unit Charge the Battery for the First TimeCharge Spare Battery Charge the Spare BatteryUser’s Guide Install Headset Install a Headset OptionalBelt clip is designed to fit snugly onto the handset Attach the Belt Clip to the HandsetPress firmly until it snaps into place Remove Belt Clip from the Handset Remove the Belt Clip from the HandsetInstalling the Telephone About Your Telephone Handset Avaya 3920 Wireless Telephone HandsetButton Description Vol Handset Display Base Unit Base UnitCharger Unit Charger UnitClean Charger Unit Contacts Clean the Charger Unit ContactsLow Battery Indications BatteryAbout Your Telephone Handset Modes Using Your TelephoneAnswer a Call Handling CallsMake a Call Answer an Intercom Call Make an Intercom CallPlace a Call on Hold Transfer a CallMute a Conversation Conference a CallChange Ring Type and Volume Changing Handset SettingsChange Earpiece Volume Set Silent Alert Set Vibrate ModeTurn Ringer Off Set the End of Range Alarm Using Your Telephone Troubleshooting Wireless Telephone Planning Wireless Telephone Planning and Installation Installation Guide to change the confirmation Specifications Specifications Repeater Accessories Accessories