Assembly

Everything in this manual is designed to ensure that the CADENCE DL35 can be assembled suc- cessfully by anyone. However, it is important to recognize that the CADENCE DL35 contains many parts and that the assembly process will take time. Most people find that by setting aside plenty of time and by deciding to make the task enjoyable, assembly will go more smoothly. Before beginning, make sure that you under- stand the following important points:

•Assembly requires two people.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

•Tighten all parts as you assemble them, unless instructed to do otherwise.

•For help identifying small parts, refer to the Part Identification Chart on page 6.

•During assembly, make sure that all parts are ori- ented as shown in the drawings.

The following tools (not included) are required for assembly:

• Two (2) adjustable wrenches

• One (1) rubber mallet

•One (1) standard screwdriver

•One (1) phillips screwdriver

•Lubricant, such as grease or petroleum jelly, and soapy water.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

1.With the help of a second person, raise the Uprights (70) to the position shown in drawing 1. Next, pivot the Console (51) to the position shown in drawings 1 and 1a. Tighten the two Console Bolts (56).

The Console (51) requires two “AA” batteries (not included). Alkaline batteries are recommended. Refer to drawing 1b. Slide the Battery Cover (52) upward and remove it. Insert two “AA” batteries into the Console (51), making sure that the negative ends of the batteries (marked “–”) are touching the springs in the Console. Reattach the Battery Cover.

2.Attach the the Catch (124) to the left side of the Frame (123) with four Catch Screws (126). Make sure that the Catch is turned as shown. Note: It may be necessary to remove the Catch Screws from the left side of the Frame before beginning this step.

1	51	1a	51
	70		56
		1b
			52
			51
2
			123
	126
	124