Weslo WMTL19408 user manual Part Identification Chart

Page 16

PART IDENTIFICATION CHART

Remove this chart and use it to identify small parts during assembly. Save this chart and the EXPLODED DRAWING/PART LIST for future reference.

Image 16

Contents QUESTIONS? Contact the Store Where YOU Purchased this PROD- UCTModel No. WMTL19408 Serial No Version No Table of Contents Assembly on page 6 and HOW to Fold Important PrecautionsTreadmill until it is properly assembled. See Page HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Pin is resting securely against the catchAssembly Wheels should turn freely Repeat this step on the left side of the treadmillPlastic Diagram of the Console Insert the key fully into the consoleHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt When you are finished exercising, remove From the console and unplug the power cord. NextHeight and that both incline pins are fully inserted Monitor your progress with the displayBefore YOU Begin For your benefit, read this manual carefully beforeMaintenance and Troubleshooting Problem The power turns off during useProblem Solution Walking belt slows when walked onKey and Unplug the Power CORD. Using Walking belt. If the walking belt has shifted toExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart Identification Chart R0908A QtyDescription Qty DescriptionExploded Drawing Ordering Replacement Parts