CONSOLE DIAGRAM
Note: If there are sheets of clear plastic on the console, remove the plastic.
Key
Clip
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features designed to make your workouts more effective.
While the manual mode of the console is selected, the speed of the treadmill can be changed with the touch of a button. As you exercise, the displays will provide continuous exercise feedback.
The console also offers two crosstrainer programs. Each program automatically controls the speed of the treadmill as it guides you through an effective workout.
To prevent damage to the walking platform, always wear clean athletic shoes while using the treadmill. During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and center the walking belt if necessary (see page 17).
HOW TO TURN ON THE POWER
Plug in the power cord (see page 10). Next, locate the
reset/off circuit breaker on the
treadmill frame near the
power cord. Make sure that Reset the circuit breaker is in the
reset position.
Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothes. Then, insert the key into the console. After a moment, the three displays will light. Important: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the posi- tion of the clip.
11