Weslo WLTL22306.0 user manual Assembly requires the included hex key, Wrench Wire cutters

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove the long wire inside the Right Handrail until instructed. Note: The underside of the treadmill walking belt is coated with high-performance lubri- cant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key		and your own phillips screwdriver	, adjustable
wrench	, and wire cutters	.

Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 21. The second number is the quantity needed for assembly. Note: Some parts may be preassembled. To avoid damaging plastic parts, do not use power tools for assembly.

Handrail Washer (30)–6	Handrail Star	Nut (17)–4	Wheel Nut
	Washer (60)–2		(A)–2
16mm Screw	Console Screw		Base Pad
(58)–6	(70)–4		Screw (42)–6
Wheel Bolt (14)–2		Handrail Bolt (12)–4
	Frame Bolt (10)–2

1.Attach the six Base Pads (19) to the bottom of the Base (71) with six Base Pad Screws (42). Note: The Base

Pads may be preassembled.

•Hazardous Voltage •Risk of Electric Shock

•Unplug Treadmill before Assembly /Disassembly.

1	71	42
42		19	42
19
			19
42
19	42
	19

6