Weslo WLTL22306.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 14

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than with your back. Raise the frame about halfway to the vertical position.

1

Frame

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the frame until the catch is past the latch pin. Slowly release the latch knob; make sure that the latch pin is resting securely against the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. make sure that the latch pin is resting securely against the catch.

1.Hold the handrails and place one foot against a wheel.

2.Tilt the treadmill backward until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it backward. To re- duce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until it is in the storage position.

2

Latch

Pin

Knob

Catch

Handrail

Wheel

14

Image 14
Contents Call TOLL-FREE QUESTIONS?Model No. WLTL22306.0 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Unplug Treadmill before Assembly /Disassembly Before YOU Begin Left Side Right SideWrench Wire cutters AssemblyAssembly requires the included hex key Pads may be preassembledRepeat this step on the left side of the treadmill Page Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord HOW to Turn on the Power Console DiagramFeatures of the Console Insert the key into the console HOW to USE the Manual ModeSelect the manual mode Select one of the crosstrainer programs HOW to USE a Crosstrainer ProgramHOW to Change the Incline of the Treadmill Follow your progress with the displaysHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Top View Maintenance and TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Exercise Intensity HOW to Measure Your Heart RateConditioning Guidelines Workout GuidelinesSuggested Stretches Page R0107A Qty DescriptionExploded Drawing A-Model No. WLTL22306.0 Exploded Drawing B-Model No. WLTL22306.0 R0107A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty