Weslo WLTL19323 user manual HOW to Fold the Treadmill for Storage, HOW to Move the Treadmill

Page 11

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Unplug the power cord. CAUTION: You must be able to

safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you

raise the treadmill, make sure to lift with your legs

rather than your back. Raise the treadmill about halfway to the vertical position.

1

2.Move your right hand to the position shown and hold the treadmill firmly. Raise the treadmill until the latch pin is aligned with the hole in the left upright. Slide the latch pin into the hole. Make sure that the latch pin is inserted as

far as possible into the hole. Lock the pin by pressing the

end of the pin into the slot in the storage latch as shown in the inset drawing.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage posi- tion in temperatures above 85° Fahrenheit.

2

Storage

Slot

Latch

Pin

Hole

Slot

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor-

age position as described above. Make sure that the latch pin is fully inserted into the hole in the left upright and locked into place as described above.

1.Hold the handrails and place one foot on the base as shown.

2.Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location.

Never

move the treadmill without tipping it back. To reduce

 

the risk of injury, use extreme caution while moving the

 

treadmill. Do not attempt to move the treadmill over an

 

uneven surface.

 

3.Place one foot on the base, and carefully lower the tread- mill until it is resting in the storage position.

Base

Front Wheels

HOW TO LOWER THE TREADMILL FOR USE

1.Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, slide the latch pin to the right. Lock the pin in place by pressing the end of the pin into the storage slot.

2. Refer to drawing 1. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.

Do not drop

the treadmill frame to the floor. CAUTION: To decrease the possibility of injury, bend your legs and

 

keep your back straight.

 

11

Image 11
Contents Customer HOT Line To Avoid DELAYS, Please Call Direct to OUR TollQUESTIONS? Important Precautions Table of ContentsDecals shown have been placed on Treadmill is capable of high speedsTreadmill on page 11. You must be Left Side Before YOU BeginFor your benefit, read this manual carefully before Until is completed AssemblyAssembly requires two persons Do notWith two Handrail Bolts 12 and two Washers Wire HarnessBracket Vertical positionPlate 4 and the Console Hold the Console 1 near the Console PlateHandrail 16 to discharge any static You attach the Console 1 to the Console PlateThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Tab Diagram of the ConsoleAdjust the speed in small increments Step -BY -STEP Console OperationHOW to Change the Incline of the Treadmill HOW to Lower the Treadmill for USE HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Power Cord Maintenance and TroubleshootingBelt has shifted to the left Problem The walking belt slows when walked onSolution Come damaged. Remove the keyWorkout Guidelines HOW to Measure Your Heart RateConditioning Guidelines Exercise IntensitySuggested Stretches Exercise FrequencyPart Identification Chart Circuit Breaker DescriptionR0703A Part No R0703A Ordering Replacement PartsLimited Warranty Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT