Weslo WLTL19323 user manual Assembly requires two persons, Do not, Until is completed, Large

Page 5

ASSEMBLY

Assembly requires two persons.	Set the treadmill in a cleared area and remove all packing materials;		do not
dispose of the packing materials until assembly is completed.		Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires a phillips screwdriver	and two adjustable wrenches		.
Note: To identify small parts used during assembly, refer
to the PART IDENTIFICATION CHART in the center of this
manual.		•Hazardous Voltage

•Risk of Electric Shock

				•Unplug Treadmill before Assembly
				/Disassembly.
	1. With the help of a second person, carefully tip the tread-		1a
	mill onto its right side as shown.		1a		10
	mill onto its right side as shown.

	Identify the Left Upright (17), which does	not have a large		11	17
	Identify the Left Upright (17), which does	not have a large
	round hole near the lower end. (Note: There may be iden-			69
	round hole near the lower end. (Note: There may be iden-			69
	tification decals on the Uprights.) Hold the Left Upright so		13		Small
	the indicated small hole is in the position shown, and hold		13		Small
	the indicated small hole is in the position shown, and hold				Hole
	a Frame Spacer (13) between the Left Upright and the
	Frame (55). Finger tighten a Frame Bolt (10) with a
	Washer (11) and a Star Washer (69) through the Left
	Upright and the Frame Spacer into the Frame as shown.
	Note: Do not tighten the bolts used in steps 1, 2, and 4				55
	until step 4 is completed.				55
	until step 4 is completed.
	Refer to drawing 1b. With the help of a second person, tip		1b
	the treadmill onto its left side.		1b	10
	the treadmill onto its left side.			10
	Hold the Right Upright (6) so the indicated large hole is in			11	6
				69
	the position shown. Insert the Wire Harness (22) into the			69
	the position shown. Insert the Wire Harness (22) into the
	large hole and out of the top of the Right Upright.				Large
					Hole
	Hold a Frame Spacer (13) between the Right Upright (6)				13
	and the Frame (55). Finger tighten a Frame Bolt (10) with				13
	and the Frame (55). Finger tighten a Frame Bolt (10) with				55
	a Washer (11) and a Star Washer (69) through the Right				55
	a Washer (11) and a Star Washer (69) through the Right
	Upright and the Frame Spacer into the Frame.
	2. With the help of a second person, attach the Base (28) to		2
	the Right Upright (6) with two Upright Bolts (30), two		2	11	30
	the Right Upright (6) with two Upright Bolts (30), two			11	30
	Washers (11), and two Upright Nuts (29).		29
			29
	Attach the Base (28) to the Left Upright (not shown) in				19
	the same way.		6		24
			6
	Attach four Base Pads (19) to the bottom of the Base (28)
	with four 3/4” Tek Screws (24) (only one Base Pad is			28
	shown).

5

Image 5

Contents Customer HOT Line To Avoid DELAYS, Please Call Direct to OUR TollQUESTIONS? Important Precautions Table of ContentsDecals shown have been placed on Treadmill is capable of high speedsTreadmill on page 11. You must be Left Side Before YOU BeginFor your benefit, read this manual carefully before Assembly requires two persons AssemblyDo not Until is completedBracket Wire HarnessVertical position With two Handrail Bolts 12 and two WashersHandrail 16 to discharge any static Hold the Console 1 near the Console PlateYou attach the Console 1 to the Console Plate Plate 4 and the ConsoleThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Adjust the speed in small increments Diagram of the ConsoleStep -BY -STEP Console Operation TabHOW to Change the Incline of the Treadmill HOW to Lower the Treadmill for USE HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Power Cord Maintenance and TroubleshootingSolution Problem The walking belt slows when walked onCome damaged. Remove the key Belt has shifted to the leftConditioning Guidelines HOW to Measure Your Heart RateExercise Intensity Workout GuidelinesSuggested Stretches Exercise FrequencyPart Identification Chart Circuit Breaker DescriptionR0703A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R0703A