Weslo 7.9 warranty Information Mode, HOW to USE the Crosswalk Arms

Page 16

THE INFORMATION MODE

The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select a measurement system of miles or kilome- ters, and turn on and turn off the display demo mode. To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown:

An “E” for English miles or an “M” for metric kilometers will appear in the lower right display. Press the Speed in- crease button to change the unit of measurement if de- sired.

The lower left display will show the total number of miles (or kilometers) that

the walking belt has moved.

The upper display will show the total number of hours the treadmill has been

used.

The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the but- tons will not function. If the demo mode is turned on, a “d” will appear in the lower right display while the infor- mation mode is selected. To turn on or off the demo mode, press the Speed decrease button.

To exit the information mode, remove the key from the console.

HOW TO USE THE CROSSWALK ARMS

As you walk on the treadmill, you can hold the handrails or use the crosswalk arms. To exercise your arms, shoulders, and back for a total body workout, move the crosswalk arms forward and back as you walk on the treadmill.

To vary the intensity of your upper body exercise, the resistance of the crosswalk arms can be adjusted. To increase the resistance, turn the resistance knobs clockwise; to decrease the resistance, turn the knobs counterclockwise.

Crosswalk

Arms

Resistance

Knobs

16

Image 16
Contents QUESTIONS? Model No. WLTL37309.0USERʼS Manual Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Page Before YOU Begin Make sure that the power cord is unplugged AssemblyDo not fully fold the Frame yet Upright Spacer 80. Be careful not to pinch 96mm Bolts 5 do not fully tighten Bolts yetTighten the Nut the Wheel must turn freely Not fully fold the Frame yetDo not fully tighten the Bolts yet Page Knob Spring Collar Pin HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired. Before using HOW to USE a Preset Workout Select the duration of the workout if desiredInformation Mode HOW to USE the Crosswalk ArmsHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. WLTL37309.0 Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. WLTL37309.0 R0809A Exploded Drawing B-Model No. WLTL37309.0 R0809A Exploded Drawing C-Model No. WLTL37309.0 R0809A Exploded Drawing D-Model No. WLTL37309.0 R0809A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT