Newcon Optik NVS 6 operation manual Nvs

Page 40

NVS 6

MANUAL

6.3.21Disconnect power cable (21) (Ref. Fig. 6.7) of the helicopter electrical system from the LVC (low-voltage converter), and disengage cable receptacle (22) from plug (23) of the LVC.

6.3.22Remove the LVC (complete with cable (20)).

6.3.23Put the night-vision goggles into the case. Do not put the rechargeable batteries into the case.

6.3.24Discharge and recharge the rechargeable batteries in conformity with the Instructions presented in the Manual furnished with the standard battery-charging unit.

6.3.25Pack the batteries and the rechargeable batteries after being charged into the case.

Page 35

Image 40

Contents NVS NVS Manual List of Effective Pages Manual General NVS Main Data NVS Standard SET NVS 6 Standard Set Safety Precautions Design of Unit and ITS Components NVS NVS Manual NVS NVS NVS LVG Screw Guides Spring Carriage NVS NVS Preparation for Operation Preparation of Helmet for Mounting Night-Vision GogglesReplacement of Casing on Helmet Retainer Individual Adjustment and Fitting Figs 6.4 thru NVS NVS Night-Vision Goggles Installed on Helmet in Stowed Position Button Lever Knob Guide Mount Plate Retainer Cable Helicopter Electrical System Connector NVS NVS NVS NVS Arrangement of Night-Vision Goggles on Helicopter Figs Thru NVS NVS NVS Operation Procedure NVS Operational Status Check Trouble Shooting NVS Trouble Probable Remedy Remarks Cause NVS NVS NVS Maintenance Practices NVS NVS NVS NVS Storage and Shipment Appendix a Appendix B Warranty NVS