Newcon Optik NVS 6 operation manual Nvs

Page 23

NVS 6

MANUAL

5.5.6Screwdriver (4), shown in Fig. 3.1, is meant for performing necessary readjustments of mount (7) and also used when the helmet standard casing is replaced.

5.5.7For removing dust, moisture and dirt from the external surfaces of the unit, use is made of cloth (11) shown in Fig. 3.1.

5.5.8The rechargeable batteries included in the single set of spare parts, serve for replacement of failed or exhausted batteries of the independent power source. The rechargeable batteries are charged by the use of a standard battery charging unit designed for charging the AA type rechargeable batteries in accordance with the Manual furnished with the charging unit.

5.6The packaging components of the NVS 6 include the case and the set of maintenance documents (the Manual and the Log Book).

5.6.1The case, shown in Fig. 3.1, is used for storing and carrying the NVS 6 set. The case is provided with side pockets, which are fastened with a zipper. One pocket holds the LVC (low-voltage converter) and the cables, and the other one is used for holding the mount, counterweight and screwdriver. The inner pocket is intended for accommodating the test pattern, cloths, spare dehydrator cartridge and batteries or rechargeable batteries. The night-vision goggles and its accessories are delivered sealed in a polyethylene film envelope, which is packed in the case together with the casing and clamp. The case is closed with a flap fastened with a zipper and a sticking fastener. The case comes complete with a carrying strap.

Page 18

Page 22 Page 24
Image 23
Page 22 Page 24
Contents NVS NVS Manual List of Effective Pages Manual General NVS Main Data NVS Standard SET NVS 6 Standard Set Safety Precautions Design of Unit and ITS Components NVS NVS Manual NVS NVS NVS LVG Screw Guides Spring Carriage NVS NVS Preparation of Helmet for Mounting Night-Vision Goggles Preparation for OperationReplacement of Casing on Helmet Retainer Individual Adjustment and Fitting Figs 6.4 thru NVS NVS Night-Vision Goggles Installed on Helmet in Stowed Position Button Lever Knob Guide Mount Plate Retainer Cable Helicopter Electrical System Connector NVS NVS NVS NVS Arrangement of Night-Vision Goggles on Helicopter Figs Thru NVS NVS NVS Operation Procedure NVS Operational Status Check Trouble Shooting NVS Trouble Probable Remedy Remarks Cause NVS NVS NVS Maintenance Practices NVS NVS NVS NVS Storage and Shipment Appendix a Appendix B Warranty NVS
Top Page Image Contents