Newcon Optik NVS 6 operation manual Storage and Shipment

Page 55

NVS 6

MANUAL

11 STORAGE AND SHIPMENT

11.1 The NVS 6 units should be stored in heated premises at

a temperature of +5 to +40 oC and a relative air humidity of not in excess of 80 %.

11.2Maintenance of the units, while at store, shall be performed as instructed in Section 10 of this Manual.

11.3Perform preservation of the unit before placing it for prolonged storage. The preservation is done by the use of lamination method

(the units are sealed in a polyethylene bags).

On the expiry of three years since preservation, the unit shall be subject to repeated preservation.

11.4The NVS 6 can be shipped by any type of transport and over varied distances, provided proper packaging is in place.

During transportation the package that contains the case with the unit shall be securely protected against shocks and dropping.

The case shall be placed in the package with the top cover directed upwards and carefully fastened.

CAUTION: AVOID DROPPING THE PACKAGE WITH THE UNIT DURING LOADING AND UNLOADING OPERATIONS.

Page 50

Page 54 Page 56
Image 55
Page 54 Page 56
Contents NVS NVS Manual List of Effective Pages Manual General NVS Main Data NVS Standard SET NVS 6 Standard Set Safety Precautions Design of Unit and ITS Components NVS NVS Manual NVS NVS NVS LVG Screw Guides Spring Carriage NVS NVS Preparation of Helmet for Mounting Night-Vision Goggles Preparation for OperationReplacement of Casing on Helmet Retainer Individual Adjustment and Fitting Figs 6.4 thru NVS NVS Night-Vision Goggles Installed on Helmet in Stowed Position Button Lever Knob Guide Mount Plate Retainer Cable Helicopter Electrical System Connector NVS NVS NVS NVS Arrangement of Night-Vision Goggles on Helicopter Figs Thru NVS NVS NVS Operation Procedure NVS Operational Status Check Trouble Shooting NVS Trouble Probable Remedy Remarks Cause NVS NVS NVS Maintenance Practices NVS NVS NVS NVS Storage and Shipment Appendix a Appendix B Warranty NVS
Top Page Image Contents