Sears NTL99011.2 user manual Assembly

9.	Remove the two #8 x 1 1/4" Screws (107) and	9
	slide the Left Handrail Cover (79) back about
	1 in. The Screws will be reattached in step			81
	16. Note: It is not necessary to move the Left				Console
	Handrail Insert (84).	99
					Assembly
	With the help of a second person, hold the con-
	sole assembly near the left handrail assembly
	(B).
	Route the Upright Wire (81) around the back of
	the console assembly as shown, and insert the
	end of the Upright Wire through the indicated
	looped Cable Tie (99).
					B
					79
					84
					107
10.	Remove the two #8 x 1 1/4" Screws (107) and	10	Console
	slide the Right Handrail Cover (80) back about
	1 in. The Screws will be reattached in step 16.		Assembly		99
	Note: It is not necessary to move the Right
	Handrail Insert (85).	E
	With the help of a second person, hold the con-
	sole assembly near the right handrail assembly				E
	(C).
	Make sure that the pulse wire (E) is inserted
	through the looped Cable Tie (99) on the right
	handrail assembly (C).
	Route the pulse wire (E) around the back of the	C
	console assembly as shown, and insert the end			99
	of the wire through the other Cable Tie (99).
			85
					80
				107
		11