7. Start four #10 x 3/4" Screws (9) with four #10 | 7 |
|
| |
Star Washers (32) into the Pulse Bar (112) and | C | 9 | ||
| ||||
the Left and Right Handrails (88, 87). |
| E | 99 | |
Slide the Pulse Bar (112) as far in the direc- | Wire |
| 32 | |
tion shown as possible, and then tighten the | Tie | 112 |
| |
#10 x 3/4" Screws (9). Do not overtighten the | 81 |
| ||
Screws. |
|
| ||
Remove the wire tie from the Upright Wire (81). | 32 | 9 | 87 | |
|
| |||
Insert the pulse wire (E) from the Pulse Bar (112) |
|
|
| |
through the looped Cable Tie (99) on the right |
|
|
| |
handrail assembly (C). |
| 88 |
| |
|
|
| ||
8. Set the console assembly face down on a soft | 8 |
|
| |
surface to avoid scratching the console |
|
| ||
1 |
|
| ||
assembly. | 36 |
| ||
Remove the four indicated 1/4" x 1/2" Screws (4) |
|
| ||
4 |
|
| ||
from the Console Frame (104). These are used | 1 |
| ||
|
| |||
in assembly step 11. |
|
| 27 | |
Attach the Left and Right Cup Holders (36, 27) |
|
| ||
| 1 | 1 | ||
with eight #8 x 1/2" Screws (1). Do not over- |
| |||
tighten the Screws. |
|
|
| |
|
| 104 | 4 | |
| Console |
|
| |
| Assembly |
|
| |
| 10 |
|
|