ASSEMBLY INSTRUCTIONS
FRONT |
REAR |
STEP 12
Attach the SEAT FRAME(9) to the LOWER UPRIGHT(6) with HEX BOLTS(M12x1.75x100mm)(75), WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82).
STEP 13
Attach the LEG LIFT(10) to the SEAT FRAME(9) with HEX BOLT(M12x1.75x90mm)(74), WASHERS (M12)(80), and NYLOCK NUT(M12x1.75)(82).
STEP 14
Run the CABLE(45) through the slot in the LEG LIFT(10). Attach the CABLE(45) to the LEG LIFT(10) with a PULLEY(43), a BOLT(M10x1.5x60mm)(69), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5) (83).
STEP 15
Refer to the illustration. Attach the ARM BRACE(16) to the LOWER UPRIGHT(6) with two HEX BOLTS(M12x1.75x80mm)(73), a HEX BOLT(M12x1.75x70mm)(72), WASHERS(M12)(80), and NYLOCK
NUTS(M12x1.75)(82).
10