![](/images/new-backgrounds/1182674/18267421x1.webp)
ASSEMBLY INSTRUCTIONS
STEP 16
Attach the FOAM SUPPORTS(15) to both sides of the LOWER UPRIGHT(6) with HEX BOLTS (M12x1.75x100mm)(75), WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82).
STEP 17
Attach the HEAD REST(35) and BACK CUSHION(36) to the BACK SUPPORT(12) with HEX BOLTS (M10x1.5x25mm)(67) and WASHERS(M10)(81).
STEP 18
Attach the SEAT CUSHION(37) to the SEAT POST(11) with HEX BOLTS(M10x1.5x25mm)(67) and
WASHERS(M10)(81).
Pull the SPRING PIN(34) on the SEAT FRAME(9). Then insert the SEAT POST(11) into the SEAT FRAME(9) and lock it in one of the adjustment hole with the SPRING PIN(34).
NOTE: There are four adjustment holes on the SEAT POST(11) for adjusting the height of the SEAT
CUSHION(37).
11