Stamina Products VG1500 owner manual Storage, Maintenance

Page 15

STORAGE

To store the VG1500TM Leverage System simply keep it in a clean dry place.

MAINTENANCE

The safety and integrity designed into the VG1500TM Leverage System can only be maintained when the VG1500TM Leverage System is regularly examined for damage and wear. Special attention should be given to the following:

1.Verify that the warning and notice labels are in place and easy to read. Call Stamina Products immediately (1-800-375-7520) for a replacement label if labels are missing or damaged.

2.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

3.Worn or damaged components shall be replaced immediately and the VG1500TM Leverage System removed from service until repair is made.

4.Verify that the cables are properly installed on all pulleys.

5.Check the condition of the cables. Replace the cables if the coatings are cracked or broken.

6.Check the pulleys for excessive wear. Replace worn pulleys.

7.Only Stamina Products supplied components shall be used to maintain/repair the VG1500TM Leverage

System.

8.Keep your VG1500TM Leverage System clean by wiping with an absorbent cloth after use.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 2040 N. Alliance, Springfield, MO Weight on this product should not exceed 300 lbsSafety Instructions Table of ContentsCall US First Before YOU Begin 100 110 120 130 140 150 Hardware Identification ChartAssembly Instructions FrontRear Assembly Instructions Front Rear Nylock NUTM10x1.583 Assembly Instructions FrontBack View NUTSM12x1.7582 CUSHION37 Repeat the above assemblies for left side Ring LAT BAR49 Setting UP the AccessoriesStorage MaintenanceWARM-UP and COOL-DOWN Limited Warranty Product Parts Drawing DIAGRAM# Part Name QTY DIAGRAM# Part Name QTY Page Rear Unit Assembly FAX/MAIL Ordering FormStamina Products, Inc Box Springfield, MO
Top Page Image Contents