Stamina Products VG1500 owner manual Assembly Instructions, Front, Rear

Page 6

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520or e-mail us at: parts@staminaproducts.com

FRONT

REAR

STEP 1

Attach the FOOT PLATE(4) to the BASE FRAME(1) with the SHAFT(42) and BUTTON HEAD BOLTS (M6x1x10mm)(64).

STEP 2

Refer to the illustration. Bolt the BASE FRAME(1), REAR STABILIZER(2), and REAR SUPPORT(3) together with HEX BOLTS(M12x1.75x110mm)(76), ARC WASHERS(M12)(78), and NYLOCK NUTS(M12x1.75)(82). Do not tighten the bolts until STEP 3.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Weight on this product should not exceed 300 lbs 2040 N. Alliance, Springfield, MOTable of Contents Safety InstructionsCall US First Before YOU Begin Hardware Identification Chart 100 110 120 130 140 150Assembly Instructions FrontRear Assembly Instructions Front Rear Assembly Instructions Front Nylock NUTM10x1.583Back View NUTSM12x1.7582 CUSHION37 Repeat the above assemblies for left side Ring Setting UP the Accessories LAT BAR49Maintenance StorageWARM-UP and COOL-DOWN Limited Warranty Product Parts Drawing DIAGRAM# Part Name QTY DIAGRAM# Part Name QTY Page Rear Unit Assembly FAX/MAIL Ordering FormStamina Products, Inc Box Springfield, MO
Top Page Image Contents