ASSEMBLY INSTRUCTIONS
Ring |
STEP 22
Slide a FOAM ROLLER(39) onto a SUPPORT TUBE(38) and screw a SECURING CAP(41) onto the end of the SUPPORT TUBE(38). Insert the other end of the SUPPORT TUBE(38) through the hole in the LEG LIFT(10). Slide another FOAM ROLLER(39) over the protruding end of the SUPPORT TUBE(38) and screw a SECURING CAP(41) onto the end of the SUPPORT TUBE(38). Repeat to assemble the FOAM ROLLERS(39) into the hole in the SEAT FRAME(9).
STEP 23
Slide a FOAM ROLLER(39) onto each FOAM SUPPORT(15) on both sides. Screw a SECURING CAP(41) onto the end of the FOAM SUPPORT(15).
STEP 24
Attach the SHORT CABLE(46) to the pulley bracket on the UPRIGHT(7) with a PULLEY(43), a BOLT (M10x1.5x50mm)(68), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)(83). Hook the eyelet end of the SHORT CABLE(46) to the ring on the UPRIGHT(7) with a QUICK LINK(47).
13