OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
The resistance of the CARRIAGE(12) can be adjusted by securing the TENSION CORDS(15) in the slots located on the FRONT FRAME(1). You can achieve various levels of resistance by securing different numbers of the TENSION CORDS(15) in the slots.
NOTE: Over time your TENSION CORDS(15) will relax. To increase resistance in the TENSION CORDS(15), stretch and
SLOTS |
ROPE LENGTH ADJUSTMENT
The ROPES(22) are wrapped on the HOOKS located on both sides of the CARRIAGE(12). You can adjust the length between the PULLEY ASSEMBLY(26) and the HAND STRAP(24) by attaching the PLASTIC HOOKS(23) onto different HOOKS.
1.Arm Function: To position the HAND STRAP(24) close to the PULLEY ASSEMBLY(26), hook the PLASTIC HOOK(23) onto the HOOKS which will shorten the
ROPE(22).
2.Leg Function: To achieve a full range of movement, hook the PLASTIC HOOK(23) of the rope onto the desired A, B, or C hook.
A |
B |
C |
HEAD REST ADJUSTMENT
The HEAD REST(19) on the CARRIAGE(12) can be positioned at an incline by simply pivoting the SUPPORT BRACKET underneath the HEAD REST(19).
SUPPORT |
BRACKET |
10