ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
parts@staminaproducts.com
Fin |
| |
| Fin | |
Double | Double | |
Flanges | ||
Flanges | ||
|
STEP 1
Connect the REAR STAND(61), the narrower one, to the MIDDLE STAND(60) with two CONNECTION BARS(62), inserting the Fins on the CONNECTION BARS(62) into the gaps in the Double Flanges on the STANDS(60, 61). Then lock the CONNECTION BARS(62) in the place by inserting the PULL PINS(65) through the Double Flanges. Repeat to connect the FRONT STAND(59) to the MIDDLE STAND(60).
6