ASSEMBLY INSTRUCTIONS
(61) Rear Stand |
|
( Narrower ) |
|
SLOTS |
|
(66) Floor Mat | (59) Front Stand |
| ( Wider ) |
STEP 5
Insert the FOAM PAD ASSEMBLIES(21) into the holes located on the CARRIAGE(12).
STEP 10
Place the Stand on the FLOOR MAT(66) as shown in the illustration.
To prevent the CARRIAGE(12) from moving while placing the AeroPilates
Performer XP615 onto its Stand, attach one of the TENSION CORDS(15) in the slots on the FRONT FRAME(1). Refer to the inset drawing. Place the AeroPilates
Performer XP615 onto the Stand as shown in the illustration.
NOTE: The rubber feet of the AeroPilates
Performer XP615 must fit into the FRONT STAND(59) and the REAR STAND(61). The FRONT STAND(59) is wider than the REAR STAND(61). The Foot Rest end of your AeroPilates
Performer XP615 will fit into the top of the FRONT STAND(59) and the Headrest end of your AeroPilates
Performer XP615 will fit into the REAR STAND(61).
9