MAINTENANCE
The safety and integrity designed into the AeroPilates
Performer XP615 can only be maintained when the AeroPilates
Performer XP615 is regularly examined for damage and wear. Special attention should be given to the following:
1.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2.Worn or damaged components should be replaced immediately or the AeroPilates
Performer XP615 removed from service until repair is made.
3.Verify that the ROPES(22) are properly installed on the PULLEY ASSEMBLYS(26).
4.Check the condition of the ROPES(22) and replace if they are frayed or worn.
5.Check the PLASTIC HOOKS(23) on the ends of the ROPES(22). Replace the ROPES(22) if PLASTIC HOOKS(23) are damaged or deformed.
6.Check the TENSION CORDS(15) for wear. Replace the TENSION CORDS(15) that are frayed or worn.
7.Check the BUNGEE CORD(58) on the CARDIO REBOUNDER(56) for wear. Replace the CARDIO REBOUNDER(56) if the BUNGEE CORD(58) is frayed or worn.
8.Check the pulleys for excessive wear. Replace worn pulleys.
9.Check the GRIP PADS(25) for damage. Replace damaged parts.
10.Check the FOAM SLEEVE(11) and FOAM PADS(21) and replace if damaged or worn.
11.Check the STOP PLATES(31, 33) for looseness or damage and replace any damaged parts.
12.Check the CUSHION(18) and replace if it is damaged or worn.
13.Check and clean the rollers and the rolling surfaces on the rail. Clean by wiping with a dry cloth.
14.Only Stamina Products supplied components shall be used to maintain/repair the AeroPilates
Performer XP615.
15.Keep your AeroPilates Performer XP615 clean by wiping with an absorbent cloth after use.
12