ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
Key Rib |
STEP 1
Lay the Main Frame Assembly on the floor as shown in the illustration. Now refer to the inset drawing. Make sure the Key Rib in the STABILIZER CAP(5) aligns with the slot in the REAR SUPPORT(4), then press the STABILIZER CAP(5) onto the REAR SUPPORT(4). Turn the Main Frame Assembly to the normal upright position and make sure the STABILIZER PAD(6) is secured to the STABILIZER CAP(5).
7