Korg 2 Other functions, Tap Tempo Control, Copy From Program, Combination mode Copy from Program

Page 28

Other functions

Tap Tempo Control

A tap tempo control function has been added in Program, Combination, Sequencer, and Song Play modes.

While the KARMA function, the sequencer, or SMF data is playing in these modes, you can control the tempo in realtime by lightly tapping the [TIMBRE/TRACK] in time with the beat at the desired tempo.

This function is convenient when you want to adjust the tempo of the KARMA function or the sequencer in realtime to match some other beat.

Example procedure

In Program mode, select A004: ! (Tricky) Kit !.

Lightly tap the [TIMBRE/TRACK] key several times at a desired tempo. Then play the keyboard or press one of the Chord Trigger buttons to start the beat at that Tempo.

Lightly tap the [TIMBRE/TRACK] key at the timing of the beats. Then, speed up your tapping slightly. The tempo of the drum pattern will become a bit faster.

The tempo “ =” indication in the upper right of the LCD screen will change along with the tempo.

Tap tempo control can be used if it is possible to operate the [TEMPO] knob. For example if a song is playing in Sequencer mode with “Tempo Mode” (☞PG p.70) set to Auto, you will not be able to use tap tempo control.

Tap tempo can also be controlled from a connected foot switch. (☞p. Global mode “Foot Sw Assign”)

Copy From Program

(Combination mode - Copy from Program)

“Copy from Program” has been added to the utility menu commands that appear in Combination mode pages such as COMBI . - . (☞PG p.44)

Copy from Program

Copies the settings of the specified program to the timbres and effects of the currently selected combination.

Choose “Copy From Program” to access the dialog box.

Use “Prog” to select the copy-source program.

Use “with Effects“ to specify whether insert effect, master effect, and master EQ settings will also be copied. The “Control Channel” of each effect will be set to the MIDI channel of the copy-destination timbre.

About the “BUS SELECT” (7.1-1(2)a) setting

•If the copy-source program’s “Use DKit Setting“ is On (checked), “BUS Select” will be set to DKit regardless of the “with Effects” setting. Also, the “DKit IFX Patch” (☞PG p.65) setting will be reset to the default state.

•If “with Effects” is On (checked), the “BUS Select” setting of the copy-source program will be copied. Also, if “BUS Select” is set to IFX1–IFX5for a timbre other than the copy-destination timbre, it will be automatically set to L/R.

•If “with Effects” is Off (unchecked) and the “BUS Select” setting of the copy-source program and copy- destination timbre are set to IFX1–IFX5, it will automatically be set to L/R.

Use “with KARMA” to specify whether KARMA module settings will also be copied. If this is on (checked), the KARMA module settings of the copy- source program will be copied to the KARMA module you specify in step . The KARMA module’s “Input Channel” will be set to Gch, the “Output Channel” will be set to the MIDI channel of the timbre you specify in step , and “Timbre Thru” will be turned On (checked).

Use “To“ to specify the copy-destination timbre.

The parameters for that timbre will be initialized. The copy-source program will be specified for “Program Select” (1. -2c).

•The “MIDI Ch” (3. -1a) setting will not change if “with KARMA” is On (checked), but will automati- cally be set to Gch if “with KARMA” is Off (un- checked).

•The “Bank (EX2) MSB/LSB” (3.1-1a) setting will not change.

•If the copy-source is a bank F program, the “Voice Reserve (2. ☞PG p.272) of the copy-destination timbre will be automatically set to 6, and the “Voice

Reserve” of the remaining timbres will be automati- cally set to . Also, the “BUS Reference” (2.3 ☞PG p.272) setting will be automatically set to the copy- destination timbre.

•The .2: Ed-Ctrl page (☞PG p.10) settings of the copy- source program will be copied.

Use “KARMA Module” to specify the copy-destination KARMA module.

Press the [F8] (“OK”) key to execute the copy, or press the [F7] (“Cancel”) to cancel without executing.

Other Functions

27

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page Table of Contents About this manual Conventions in this manualIntroduction Main features of versionKarma function Installing the system Sequencer modeGlobal mode Disk modeAfter updating the system, you must also update the GE data You must update the GE data after updating the systemUpdating the system data Updating the GE dataKarma function GE SelectSelect by Category Karma Time Sig. Karma Time SignatureFreeze Randomize Parm3 Parameter3RTC Karma RealTime Controls TxFltr TxFilter3a Freeze Randomize Start Seed 2147483648…0 Random…+2147483647Freeze Loop Length Off, 1…32 How the Start Seed value affects the phraseRetrigger Each Time Off, On Random CaptureLink Start Seeds Off, On Procedure Random FF/REWAuto Assign Karma RT Name RT Parameter RealTime ParameterGrp Parm Group Off, Mix, Ctrl, Trig, Zone, Rand, PE Auto K.RT Name Auto Assign Karma RT NameAutoName w/GEchg Copy/Swap Karma SceneAutoName w/GEchg Auto Assign Karma RT Name on GE change Copy Scene 1&2 Copy Karma SceneGE Parameter Phase GroupGE Generated Effect Group Beginning Offset %/End Offset % Pattern ParametersStep Transpose Value 48…0…+48 Step Transpose On/OffDuration Mode Rhythm GroupDuration Group Swing%CCs Group Drum Group Associated ParametersSequencer mode SEQ .3 Tone AdjustDestination -6 and Value 123456a Destination -6, ValueSequencer mode 1b UtilityCopy From Prog Copy from Program EnhancementsMulti REC Standby check box Multi REC Standby Off, OnAuto Song Setup function Quantize Swing ParameterOther enhancements Utility menuGlobal mode RT Realtime CommandUser GE Memory Protect Midi ClockFoot SW Assign Dump User GEFoot Pedal Assign Disk mode LoadLoad .PCG Additional Load functionsData compatibility SaveChanges and additions to the Save function Global mode settings that were added in version Sequencer mode Tone Adjust parametersProgram, Combination, Sequencer, Song Play parameters Combination mode Copy from Program Other functionsTap Tempo Control Copy From ProgramAbout system exclusive messages Program modeData dump request song, track, measure region from Important Notice to Consumers 15-12, Shimotakaido 1-chome, Suginami-ku, Tokyo, Japan
Top Page Image Contents