Korg 2 manual Program mode, About system exclusive messages

Page 29

MIDI

About system exclusive messages

KARMA music workstation system version 2.0 adds support for the following system exclusive messages.

•SMF Data Dump Request reception

•SMF Data Dump transmission

•GE Data Dump Request reception

•GE Data Dump transmission/reception

•Parameter change transmission/reception in Sequencer mode

In system version 2.0, the contents of the following system exclusive messages have changed.

•The PROGRAM PARAMETER DUMP transmission/ reception Function ID 0x4C has changed to 0x72.

•The COMBINATION PARAMETER DUMP transmis- sion/reception Function ID 0x4D has changed to 0x73.

•The SEQUENCE DATA (In Memory) DUMP transmis- sion/reception Function ID 0x48 has changed to 0x74.

•The ALL DATA (PROG, COMBI, GLOBAL, DRUMS, SEQ) DUMP transmission/reception Function ID 0x50 has changed to 0x75.

*If you would like to obtain the MIDI Implementation, which includes a complete listing of the MIDI exclusive format, please contact the Korg distributor for your country.

About SMF Data Dump Request reception, SMF Data Dump transmission, and GE Data Dump transmission/ reception

By using KARMA MW* (dedicated Mac/PC software for the KARMA music workstation), you can use your computer to edit and create GEs. You can create your own original user GEs by editing all of the more than 400 parameters that make up a GE. The GE data you create can be saved/loaded either via floppy disk or as a MIDI GE data dump, and used in the KARMA music workstation.

The KARMA MW software is also able to convert SMF (Standard MIDI File) data into a GE. You can use this capability to create a user GE from any MIDI performance data, and then edit the GE parameters to freely modify the phrase. So that you can make efficient use of this, KARMA Music Workstation system version 2.0 can receive an SMF

data dump request (song, track, measure region) from the

KARMA MW software, and respond by converting sequence data from Sequencer mode into SMF and transmitting it as an SMF data dump. Then the KARMA MW software can convert this data into a user GE, and dump the GE data back into the KARMA music worksta- tion, so that you can use the KARMA function to modify the phrase.

*Produced by Karma Lab (http://www.karma-lab.com). Macintosh and Windows versions are available. English version only.

About parameter change transmission/reception in Sequencer mode

In Sequencer mode, the following parameters can be edited individually by transmitting and receiving system exclusive parameter change messages.

•SEQ 1.1: Play/REC parameters other than “Location,” “Meter,” “Resolution,” “ (Tempo),” “Tempo Mode,” Song name, “RPPR On/Off,” “Track Select,” “PLAY/ MUTE/REC,” “SOLO On/Off,” and Preference page parameters.

•The parameters of the following pages:

SEQ 1.2: Loop

SEQ 2.2: Controller

SEQ 2.3: MOSS

SEQ 3.1: Param1

SEQ 3.2: Param2

SEQ 3.3: Key Zone

SEQ 3.4: Vel Zone

SEQ 4.1–4: MIDI Filter 1–4

SEQ 5.3: Tone Adjust

SEQ 6.1: KARMA

SEQ 6.2: KARMA Mdl

SEQ 6.3: KARMA GE

SEQ 6.4: KARMA RT

SEQ 7.1: BUS

SEQ 7.2: Insert FX

SEQ 7.3: Master FX

Program mode

Operation when the Program mode PROG 2.1-1b “Mode (Voice Assign Mode)” (☞PG p.7) is Mono has changed as follows.

In system version 1.0, notes were remembered internally for up to three note-ons.

C on → D on → E on → F on → F off → E off → D off

C sounds D sounds E sounds F sounds E sounds D sounds No sounds

In system version 2.0, the number of note-ons remembered has been expanded to ten. This is effective when perform- ing in mono mode.

C on → D on → E on → F on → F off → E off → D off

C sounds D sounds E sounds F sounds E sounds D sounds C sounds

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Page Table of Contents Conventions in this manual About this manualKarma function Main features of versionIntroduction Sequencer mode Installing the systemGlobal mode Disk modeYou must update the GE data after updating the system After updating the system, you must also update the GE dataUpdating the system data Updating the GE dataGE Select Karma functionSelect by Category Karma Time Sig. Karma Time SignatureParm3 Parameter3 Freeze RandomizeRTC Karma RealTime Controls TxFltr TxFilterStart Seed 2147483648…0 Random…+2147483647 3a Freeze RandomizeFreeze Loop Length Off, 1…32 How the Start Seed value affects the phraseLink Start Seeds Off, On Random CaptureRetrigger Each Time Off, On Random FF/REW ProcedureRT Parameter RealTime Parameter Auto Assign Karma RT NameGrp Parm Group Off, Mix, Ctrl, Trig, Zone, Rand, PE Auto K.RT Name Auto Assign Karma RT NameCopy/Swap Karma Scene AutoName w/GEchgAutoName w/GEchg Auto Assign Karma RT Name on GE change Copy Scene 1&2 Copy Karma SceneGE Generated Effect Group Phase GroupGE Parameter Pattern Parameters Beginning Offset %/End Offset %Step Transpose Value 48…0…+48 Step Transpose On/OffRhythm Group Duration ModeDuration Group Swing%CCs Group Associated Parameters Drum GroupSEQ .3 Tone Adjust Sequencer modeDestination -6 and Value 123456a Destination -6, Value1b Utility Sequencer modeEnhancements Copy From Prog Copy from ProgramMulti REC Standby check box Multi REC Standby Off, OnQuantize Swing Parameter Auto Song Setup functionOther enhancements Utility menuRT Realtime Command Global modeUser GE Memory Protect Midi ClockFoot Pedal Assign Dump User GEFoot SW Assign Load Disk modeLoad .PCG Additional Load functionsChanges and additions to the Save function SaveData compatibility Program, Combination, Sequencer, Song Play parameters Sequencer mode Tone Adjust parametersGlobal mode settings that were added in version Other functions Combination mode Copy from ProgramTap Tempo Control Copy From ProgramData dump request song, track, measure region from Program modeAbout system exclusive messages 15-12, Shimotakaido 1-chome, Suginami-ku, Tokyo, Japan Important Notice to Consumers
Top Page Image Contents