INSTALLATION
UNPACKING
1.Carefully remove all components from the carton.
2.Inspect all components.
3.If damage is evident to the contents, please notify the carrier and your
PUMP AND MATTRESS SETUP
1. Remove all sheets, blankets, and pillows from the bed.
2.Place the mattress on top of the bed frame; ensure that the foot end symbol faces up at foot end as shown at right. Secure mattress to bed with straps.
3.Fold open the wire hangers on the back of the pump as shown at right.
4.Either hang the pump on the bed's foot end, as shown at right, or place the pump on a flat surface easily accessible to the caregiver and/or doctor.
Caution: Place the device in a position where the caregiver and/ or doctor can access it easily.
5.Connect the
hanger
Caution: Ensure that the air hoses are not kinked or tucked under the mattress.
| 13 |