OPERATION
GETTING STARTED
1.Turn the main power switch to the ON position.
2.Press the front panel power button. The power indicator will illuminate.
main
power switch
power button
Note: The mattress system will
automatically enter maxfirm mode for the quickest inflation at
3.The pump will begin delivering air into the mattress. The low pressure indicator and the maxfirm indicator will illuminate for approximately twenty minutes until the mattress is fully inflated.
4.Upon inflation, the system will automatically enter auto- adjust mode to automatically select the appropriate pressure according to the patient's weight. The auto- adjust indicator LEDs will flash from left to right, and the system will cycle through inflation and deflation, until the Ready LED illuminates to show the process is complete, and the mattress system automatically en- ters alternate therapy mode.
5.Replace all sheets, blankets, and pillows on the bed.
6.You can now adjust therapy modes or tuning. Please see earlier section, PUMP: FRONT PANEL, for a complete de- scription of available adjustments, buttons and indicators.
QUICK DISCONNECT
Pull the power plug from the wall connector to disconnect
the device quickly.
| 15 |