Fuse replacement
tool needed: small screwdriver
1.If you suspect a blown fuse, discon- nect the plug from the wall outlet immediately.
2.Use a small screwdriver to remove the cover of the fuse holder (fuse lo- cations are shown in picture at right).
fuse
3.Insert a new fuse of the correct rating (T1A/250V, VDE approved).
4.Replace the fuse holder cover. Ensure that fuse holder cover is securely installed.
Air filter replacement
tool needed: small screwdriver
1.Use a small screwdriver to remove the air filter plate located at rear of pump (filter location is shown in picture at right).
2.Remove the filter. The filter is reus- able, if not torn, and can be washed gently with a mild detergent and water. Dry the filter before use.
filter
3.Replace the filter and cover. Ensure that filter cover is securely installed. Replace the air filter regularly if it is gray, torn, or the environment is dirty.
STORAGE
1.Lay the mattress out flat and upside down.
2.Roll from the head end toward the foot end.
3.Stretch the
4.Store mattress and pump in a
Caution: Do not fold, crease or stack the mattress.
18 |
|