Operating Features - continued
Odometer / Hour Meter:
When the tether cord is initially placed in operational position the dot matrix window will display HOUR and other windows will indicate total time (hour) of treadmill use. This data will stay on a few seconds and change to an odometer. Display will then blank out.
The left hand window indicates upper computer software version. This is a service issue to refer to computer software design.
To Turn Treadmill Off:
Two methods accomplish this:
~Press and release red Stop/Pause switch twice (once after Pause mode). Display will blank out and treadmill will slow to a stop.
~Pull tether cord. Use tether cord only in a panic situation or to secure the treadmill.
Page 11