JVC RX-554VBK manual Press Test to start checking the speaker output, Balance

Activating the Surround Sounds

4. Press TEST to start checking the speaker output	TEST
balance.	6

“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:

Left front	Center	Right front
speaker	speaker	speaker

Rear speakers

Notes:

•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”

•No test tone comes out of the center speaker when you select “PHANTOM” for the center mode.

5.If necessary, adjust the speaker output balance as follows:

•To adjust the rear speaker output level, press REAR +/–.

•To adjust the center speaker output level, press CENTER +/–.

Pressing – decreases the output level up to –10 dB. Pressing + increases the output level up to +10 dB.

–REAR +

8 9

– CENTER +

10 +10

Notes:

• The sound levels of the left and
	right rear speakers will be the
	same.
•	You cannot set the sound level
	of the rear speakers when you
	have selected “3CHLOGIC.”
•	You cannot set the sound level
	of the center speaker when you
	select “PHANTOM” for the
	center mode.

6. Press TEST again to stop the test tone.	TEST
	6

If you have selected JVC Theater Surround, go to the following steps.

7. Press EFFECT to adjust the effect level.

Each time you press the button, the effect level changes	EFFECT
	4
as follows:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, the effect of the Theater

Surround mode becomes stronger.

Note:

When you have selected “PROLOGIC” or “3CHLOGIC,” you cannot select the effect level.

31