Important Technical Details

appears in the right color on your display.

Follow this procedure until all the pieces in the problem or position are completely set up. Make sure that King Arthur knows which color is to move—

press to change the side toCONTRASTmove. Finally, press to play or to have King

ArthurCLEAR analyze the position.

NEARLY ALL OPERATIONAL PROBLEMS ARE CAUSED BY INCOR-
RECTLY REGISTERING MOVES! KING ARTHUR CAN’T SEE YOUR
MOVES, HE HAS TO “FEEL” THEM. REMEMBER—ALWAYS FOL-
LOW THE SIMPLE TWO-STEP
PROCEDURE:
1.	PUSH THE FROM SQUARE; LISTEN FOR
2.	THE CONFIRMING, HIGH-PITCHED BEEP.
	PUSH THE TO SQUARE; LISTEN FOR
	THE CONFIRMING, HIGH-PITCHED BEEP.

IF A LOW-PITCHED BEEP SOUNDS, LOOK CAREFULLY AT THE LCD AND FOLLOW THE DIRECTIONS DISPLAYED TO REPLACE THE ILLEGALLY MOVED PIECE. THEN MAKE A LEGAL MOVE.

KING ARTHUR

CHAPTER 10:

10.1 The ACL button

King Arthur may occasionally “freeze up” or refuse to function properly because of static electric discharge. If this happens, press the

ALL CLEAR (ACL) button.

To do this, turn King Arthur upside-down so the battery compart-

ment is on the upper right. The button is recessed. You'll see a "dimple" toward the bottomALL rightCLEAR. It has a small hole in it. Gently push a ballpoint pen or a straightened paper clip into the hole and then release. You'll again hear King Arthur's ready tones.

SPECIAL NOTE: After you push the ACL button, King Arthur will have forgot- ten any game positions that may have been in his memory.

10.2 Special Care

υ Avoid rough handling such as bumping or dropping.

υ Avoid moisture and extreme temperatures. Store away from windows and other direct sources of heat and cold, such as heating, air vents or direct sunlight. For best results, use between the temperatures of 39º and 100º Fahrenheit (4º and 38º Celsius).

υ Clean using only a slightly damp cloth. Do not use cleaners with chemical agents.