JVC RV-NB20B, RV-NB20W Programming the playing order of the tracks, Random play, Repeating tracks

Page 15

Programming the playing order of the tracks

Using the remote control only

„You can program up to 50 tracks in any desired order including the same tracks.

„You can only make a program when the system is stopped.

„While making a program, you cannot specify a group number to select a track.

„1. Set a disc. „2. Press CD 6.

„3. Press 7 to stop the disc.

„4. Press PLAY MODE repeatedly to select “PROGRAM.”

The system enters the programming mode and the PRGM indicator lights up.

„5. Press the number buttons to select the track to program.

•For detailed operations, see “To locate a track directly” on page 11.

Example: For track 7, press 7.

Program order number

Last programmed track

(After 2 seconds)

Total playback time of the programmed tracks*

*Total playback time will not appear while making a program using an MP3 disc.

„6. Repeat step to select other tracks for the program.

• To cancel the last track programmed, press CANCEL once.

„7. Press CD 6.

The system plays the tracks in the same order as you have programmed them.

„You can skip to a particular programmed track by pressing 4 or x during program play.

While stopped:

„To confirm the programmed tracks, press 4 or x repeatedly; the tracks making up the program will successively be displayed in the programmed order.

•To add a track to the end of the program, simply press the number buttons.

„To delete the tracks in the program, press CANCEL repeatedly. Each time you press the button, the last track will be erased.

„To delete the entire program, press and hold CANCEL until “CLEAR!” appears on the display.

•Turning off the power will clear the program.

„To exit from program mode, press PLAY MODE repeatedly until the PRGM indicator goes off.

Each time you press the button, the play mode changes as follows:

Normal play = PROGRAM = RANDOM = (back to the beginning)

Note:

(For CDs) If the total playback time of the programmed tracks exceeds 99 minutes 59 seconds, “– – : – –” will appear on the display.

Random play

The tracks will play in no special order when you use this mode.

Using the remote control only

„1. Set a disc. „2. Press CD 6.

„3. Press 7 to stop the disc.

„4. Press PLAY MODE repeatedly to select “RANDOM.”

The RANDOM indicator lights up on the display.

„5. Press CD 6.

The tracks are played in random order once.

To skip a track during playback, press x to skip to another track in the random sequence. The 4 button works only to go back to the beginning of the current track.

While stopped:

„To exit from random mode, press PLAY MODE repeatedly until the RANDOM indicator goes off.

Each time you press the button, the play mode changes as follows:

Normal play = PROGRAM = RANDOM = (back to the beginning)

Repeating tracks

You can repeat the tracks or individual track as many times as you like.

Using the remote control only

Press REPEAT.

Each time you press the button, repeat indicator changes as follows:

For CDs:

ALL = = canceled = (back to the beginning)

• ALL: Repeats all the tracks on the disc.

• : Repeats the current track.

For MP3 discs:

ALL = GROUP = = canceled = (back to the beginning)

• ALL: Repeats all the tracks on the disc.

• GROUP: In normal play mode, repeats all the tracks in a group.

In program and random play modes, group repeat cannot be selected.

• : Repeats the current track.

„Repeat mode (except “ GROUP”) remains in effect even when you change the play mode.

To exit from repeat mode, press REPEAT repeatedly until the repeat indicator on the display goes off.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents RV-NB20B/RV-NB20W Mises en garde, précautions et indications diverses Important for Laser Products „ Table of contents Display window „ Index of parts and controlsCompu Play One Touch Operation Remote controlAccessories „ Getting startedCompatible iPod types Using the remote control RM-SRVNB20ACarrying the system Checking the type of your iPodRear view ConnectionsDisconnecting the iPod Disconnecting the auxiliary equipmentFront view Press ON/STANDBY Turning the power on and offAdjusting the volume „ Basic operationsActivating clear sound Adjusting the super woofer volumeSelecting the sound mode Turning off the sound temporarily „1. Press FM/AM repeatedly to select either FM or AM Tuning in to a station „2. Select a station using one of the following methods „ Listening to the radio„ Playing back discs Presetting stationsSetting a disc To change the preset stations, repeat the same steps asUsing the disc player-Normal Play „1. Set a disc. „2. Press CDPress the number buttons to directly play a track Programming the playing order of the tracks Random playRepeating tracks „ Listening to the iPod Playing the iPodTurning off the iPod Changing the AUX jack sensitivity Switching to AUX automatically-QP Link„ Listening to auxiliary equipment Listening to auxiliary equipmentSetting the sleep timer „ Using the microphone/guitar„ Using the timer Setting the clockSetting the daily timer „ Care and maintenance „ TroubleshootingSymptom Possible cause Action Symptom „ SpecificationsFor U.S.A For U.S.A RV-NB20B/RV-NB20W Powered Woofer CD System Manuel D’INSTRUCTIONS Mises en garde, précautions et indications diverses Important for Laser Products „ Table of contents „ Index of parts and controls Group UP, Group Down Carrying the system „ Connecting the microphone/guitar „ Connecting the iPod See Turn the Volume +/- control clockwise to Increase the volume or turn itCounterclockwise to decrease the volume Played „ Listening to the radio „ Playing back discs Using the disc player-Normal PlaySet a disc Press CD Tracks will play in no special order when you use this mode „ Listening to the iPod „ Listening to auxiliary equipment „ Using the microphone/guitar Setting the daily timer „ Care and maintenance Disc Player Tuner EN, FR LVT1614-003B B RV-NB20B/RV-NB20W Above ALL Information for Users on Disposal of Old Equipment„ Table of contents „ Index of parts and controls „ Getting started R6SUM-3/AA15F supplied Connections To dock connector IPod stand supplied IPod not supplied „ Basic operations Turning off the sound temporarily „ Listening to the radio „ Playing back discs Using the disc player-Normal Play Programming the playing order of the tracks „ Listening to the iPod „ Listening to auxiliary equipment „ Using the microphone/guitar „5. Set the OFF time example „ Care and maintenance Phones 0906KMMMDWJEIN
Top Page Image Contents