JVC RV-NB20W, RV-NB20B „ Using the microphone/guitar, „ Using the timer, Microphone/guitar mixing

Page 18

„Using the microphone/guitar

Microphone/guitar mixing

Using a microphone or a guitar (not supplied), you can mix its sound with a source sound.

„1. Make sure the MIC/GUITAR LEVEL control on the rear of the system is properly set.

•When using a microphone, make sure the knob is pressed in ( ).

•When using a guitar, make sure the knob is released ( ).

„2. Set the MIC/GUITAR LEVEL control to MIN by turning it fully counterclockwise.

„3. Connect a microphone or a guitar into the

MIC/GUITAR INPUT jack on the rear of the system.

„4. Start a source: disc, tuner, iPod, or auxiliary equipment.

„5. Adjust the VOLUME +/– control and the

MIC/GUITAR LEVEL control, as you play the microphone or the guitar.

CAUTION:

DO NOT connect a bass guitar to the MIC/ GUITAR INPUT jack, as it may damage the system.

„Using the timer

 

ON/STANDBY

 

CANCEL

SLEEP

SET

 

CLOCK/TIMER

4

x

The timers let you control the listening functions automatically.

Setting the clock

When the power is first supplied, the CLOCK indicator and “AM12:00” flash on the display. Set the clock.

Note:

The clock must be correctly set for the timers to work.

CAUTION:

If memory backup batteries are exhausted or not installed, and the AC power cord is plugged in again after being disconnected, or power is restored after a power failure, the CLOCK indicator will flash on the display. Set the current time (clock) again.

Using the remote control only

„1. Press ON/STANDBY.

„2. Press CLOCK/TIMER repeatedly until the

CLOCK indicator lights up.

The hour digit flashes on the display.

„3. Press x or 4 to select the hour.

•When you press and hold the button, the hour digit changes continuously.

„4. Press SET to set the hour.

The minutes digits start flashing on the display.

„5. Press x or 4 to select the minute.

•When you press and hold the button, the minute digit changes continuously.

•If you want to change the hour setting, press CANCEL.

„6. Press SET to finish setting the clock.

Setting the sleep timer

Use the sleep timer to turn the system off after a certain number of minutes when it is playing. By setting the sleep timer, you can fall asleep to the music and know that your system will turn off by itself rather than playing all night.

„You can set the sleep timer only when the system is turned on.

Using the remote control only

„1. Press SLEEP.

The SLEEP indicator lights up on the display.

SLEEP indicator

15

Page 17 Page 19
Image 18
Page 17 Page 19
Contents RV-NB20B/RV-NB20W Mises en garde, précautions et indications diverses Important for Laser Products „ Table of contents „ Index of parts and controls Display window„ Getting started Remote controlAccessories Compu Play One Touch OperationChecking the type of your iPod Using the remote control RM-SRVNB20ACarrying the system Compatible iPod typesConnections Rear viewDisconnecting the iPod Disconnecting the auxiliary equipmentFront view „ Basic operations Turning the power on and offAdjusting the volume Press ON/STANDBYTurning off the sound temporarily Adjusting the super woofer volumeSelecting the sound mode Activating clear sound„ Listening to the radio Tuning in to a station„2. Select a station using one of the following methods „1. Press FM/AM repeatedly to select either FM or AMTo change the preset stations, repeat the same steps as Presetting stationsSetting a disc „ Playing back discsUsing the disc player-Normal Play „1. Set a disc. „2. Press CDPress the number buttons to directly play a track Programming the playing order of the tracks Random playRepeating tracks „ Listening to the iPod Playing the iPodTurning off the iPod Listening to auxiliary equipment Switching to AUX automatically-QP Link„ Listening to auxiliary equipment Changing the AUX jack sensitivitySetting the clock „ Using the microphone/guitar„ Using the timer Setting the sleep timerSetting the daily timer „ Care and maintenance „ TroubleshootingSymptom Possible cause Action „ Specifications SymptomFor U.S.A For U.S.A RV-NB20B/RV-NB20W Powered Woofer CD System Manuel D’INSTRUCTIONS Mises en garde, précautions et indications diverses Important for Laser Products „ Table of contents „ Index of parts and controls Group UP, Group Down Carrying the system „ Connecting the microphone/guitar „ Connecting the iPod See Turn the Volume +/- control clockwise to Increase the volume or turn itCounterclockwise to decrease the volume Played „ Listening to the radio „ Playing back discs Using the disc player-Normal PlaySet a disc Press CD Tracks will play in no special order when you use this mode „ Listening to the iPod „ Listening to auxiliary equipment „ Using the microphone/guitar Setting the daily timer „ Care and maintenance Disc Player Tuner EN, FR LVT1614-003B B RV-NB20B/RV-NB20W Information for Users on Disposal of Old Equipment Above ALL„ Table of contents „ Index of parts and controls „ Getting started R6SUM-3/AA15F supplied Connections To dock connector IPod stand supplied IPod not supplied „ Basic operations Turning off the sound temporarily „ Listening to the radio „ Playing back discs Using the disc player-Normal Play Programming the playing order of the tracks „ Listening to the iPod „ Listening to auxiliary equipment „ Using the microphone/guitar „5. Set the OFF time example „ Care and maintenance Phones 0906KMMMDWJEIN

RV-NB20B, RV-NB20W specifications

The JVC RV-NB20W and RV-NB20B are versatile portable audio systems designed to deliver impressive sound quality and a range of features for music enthusiasts on the go. These models not only cater to the music needs of users but also incorporate advanced technologies that enhance the overall listening experience.

At the heart of the RV-NB20 series lies a powerful audio output system, which includes a set of robust speakers delivering rich and clear sound across various frequencies. The built-in amplifier ensures that music is played at optimal levels, making it suitable for both indoor and outdoor use. The compact design of these units does not compromise audio performance, allowing users to enjoy their favorite tracks in any setting.

Both models support a variety of connectivity options, including Bluetooth, enabling seamless pairing with smartphones, tablets, and other devices. This wireless feature provides freedom of movement and eliminates the hassle of tangled cords. Additionally, the RV-NB20W and RV-NB20B come equipped with USB ports and auxiliary inputs, allowing for versatile playback from different sources.

A standout feature of the RV-NB20 series is the inclusion of a CD player, which appeals to users who still enjoy physical media. The CD playback capability ensures that older music collections can be enjoyed without the need for digital conversion. Furthermore, the systems have AM/FM radio built-in, offering access to local broadcasts and the ability to capture live events.

Portability is another strong point of the RV-NB20W and RV-NB20B. Both models are equipped with a built-in rechargeable battery that offers hours of playback time, making them ideal for picnics, beach outings, or any outdoor activities. The rugged construction of the units also ensures durability, standing up to the rigors of travel.

In terms of design, the RV-NB20W boasts a sleek white finish, while the RV-NB20B features a classic black look. Both options are aesthetically pleasing and will complement various environments. Additionally, the intuitive controls and LED display make it easy to navigate between functions and settings.

In summary, the JVC RV-NB20W and RV-NB20B are feature-rich portable audio systems that successfully blend sound quality, versatility, and convenience. With their array of connectivity options, robust audio performance, and user-friendly design, these models are perfect for anyone looking to enhance their music experience, whether at home or on the go.
Top Page Image Contents