JVC RV-NB20B, RV-NB20W manual „5. Set the OFF time example

Page 65

„2. Set the length of time you want the source to play before shutting off.

Each time you press the button, it changes the number of minutes shown on the display in this sequence:

10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the beginning)

After setting the number of minutes for the sleep timer, the indication will stop flashing and go off.

The system is now set to turn off after the number of minutes you set.

To confirm the sleep time:

When SLEEP is pressed, the remaining sleep time is displayed. Wait until the display returns to the original display.

To cancel the sleep timer:

Press SLEEP repeatedly to select “OFF.” Turning off the system also cancels the sleep timer.

Setting the daily timer

Once the timer has been set, it will be activated at the same time everyday until the timer is turned off.

•While the timer is being set, the timer indicator ( ) lights up.

•After the timer has been set, the timer indicator ( ) also lights up if the power is supplied through the AC outlet.

•While the timer is working, the timer indicator ( ) flashes.

Using the remote control only

„1. Press ON/STANDBY.

„2. Press CLOCK/TIMER.

“TIMERON?” appears.

•Press SET to activate the timer setting you have made before.

•Press CANCEL to cancel the timer.

•Go to the next step to set the timer first time (or reset the timer).

„3. Press CLOCK/TIMER again, so that the timer indicator ( ) and ON indicator light up.

The hour digit of the current ON time flashes on the display.

„4. Set the on-time you want the system to turn on.

(1)Press x or 4 to select the hour, then press SET.

(2)Press x or 4 to select the minute, then press SET. The OFF indicator lights up.

•Press and hold the button to change the time rapidly.

•If you want to change the time setting, press CANCEL.

„5. Set the OFF time (example: 8:30).

(1)Press x or 4 to select the hour, then press SET.

(2)Press x or 4 to select the minute, then press SET.

•Press and hold the button to change the time rapidly.

•If you want to change the time setting, press CANCEL.

„6. Press x or 4 to select the music source you want to listen to, then press SET.

Each time you press the button, the display changes as shown below:

TUNER = CD = iPod = (back to the beginning)

„7. Press x or 4 to select the volume level, then press SET.

– –: The current volume level will be used.

0 to 50: When the timer is turned on, the volume will be automatically set to the selected level.

• The current timer setting appears for confirmation.

„8. Before turning off the system, prepare the music source selected in step .

TUNER:

Tune in to the desired frequency (FM/AM).

CD:

Set a disc.

iPod:

Connect an iPod to the iPod jack.

„9. Press ON/STANDBY to turn off the system.

•When the timer turns on, the volume level gradually increases from 0 (zero) to the preset level in step .

However, if the volume has been set to “– –”, the volume level will be set to the last level directly.

To cancel the operation, press CLOCK/TIMER until the display returns to the original one.

To cancel the timer, press CLOCK/TIMER once, then press CANCEL. (“TIMEROFF” appears, only when power is on.)

To reactivate (or confirm) the canceled timer, press CLOCK/TIMER once, then press SET. (The current timer setting appears for confirmation.)

Notes:

•The timer cannot be set if on-time and off-time are the same.

•The timer does not work if the system is not in the standby mode (the system needs to be in standby mode at least one minute before the on-time).

CAUTION:

If memory backup batteries are exhausted or not installed, and the AC power cord is disconnected or there is a power failure, time settings will be erased from memory. If this happens, set the current time (clock) and perform the timer setting again.

16

Page 64 Page 66
Image 65
Page 64 Page 66
Contents RV-NB20B/RV-NB20W Mises en garde, précautions et indications diverses Important for Laser Products „ Table of contents Display window „ Index of parts and controlsAccessories Remote control„ Getting started Compu Play One Touch OperationCarrying the system Using the remote control RM-SRVNB20AChecking the type of your iPod Compatible iPod typesRear view ConnectionsFront view Disconnecting the iPodDisconnecting the auxiliary equipment Adjusting the volume Turning the power on and off„ Basic operations Press ON/STANDBYSelecting the sound mode Adjusting the super woofer volumeTurning off the sound temporarily Activating clear sound„2. Select a station using one of the following methods Tuning in to a station„ Listening to the radio „1. Press FM/AM repeatedly to select either FM or AMSetting a disc Presetting stationsTo change the preset stations, repeat the same steps as „ Playing back discsPress the number buttons to directly play a track Using the disc player-Normal Play„1. Set a disc. „2. Press CD Repeating tracks Programming the playing order of the tracksRandom play Turning off the iPod „ Listening to the iPodPlaying the iPod „ Listening to auxiliary equipment Switching to AUX automatically-QP LinkListening to auxiliary equipment Changing the AUX jack sensitivity„ Using the timer „ Using the microphone/guitarSetting the clock Setting the sleep timerSetting the daily timer Symptom Possible cause Action „ Care and maintenance„ Troubleshooting Symptom „ SpecificationsFor U.S.A For U.S.A RV-NB20B/RV-NB20W Powered Woofer CD System Manuel D’INSTRUCTIONS Mises en garde, précautions et indications diverses Important for Laser Products „ Table of contents „ Index of parts and controls Group UP, Group Down Carrying the system „ Connecting the microphone/guitar „ Connecting the iPod See Counterclockwise to decrease the volume Turn the Volume +/- control clockwise toIncrease the volume or turn it Played „ Listening to the radio „ Playing back discs Set a disc Press CD Using the disc player-NormalPlay Tracks will play in no special order when you use this mode „ Listening to the iPod „ Listening to auxiliary equipment „ Using the microphone/guitar Setting the daily timer „ Care and maintenance Disc Player Tuner EN, FR LVT1614-003B B RV-NB20B/RV-NB20W Above ALL Information for Users on Disposal of Old Equipment„ Table of contents „ Index of parts and controls „ Getting started R6SUM-3/AA15F supplied Connections To dock connector IPod stand supplied IPod not supplied „ Basic operations Turning off the sound temporarily „ Listening to the radio „ Playing back discs Using the disc player-Normal Play Programming the playing order of the tracks „ Listening to the iPod „ Listening to auxiliary equipment „ Using the microphone/guitar „5. Set the OFF time example „ Care and maintenance Phones 0906KMMMDWJEIN

RV-NB20B, RV-NB20W specifications

The JVC RV-NB20W and RV-NB20B are versatile portable audio systems designed to deliver impressive sound quality and a range of features for music enthusiasts on the go. These models not only cater to the music needs of users but also incorporate advanced technologies that enhance the overall listening experience.

At the heart of the RV-NB20 series lies a powerful audio output system, which includes a set of robust speakers delivering rich and clear sound across various frequencies. The built-in amplifier ensures that music is played at optimal levels, making it suitable for both indoor and outdoor use. The compact design of these units does not compromise audio performance, allowing users to enjoy their favorite tracks in any setting.

Both models support a variety of connectivity options, including Bluetooth, enabling seamless pairing with smartphones, tablets, and other devices. This wireless feature provides freedom of movement and eliminates the hassle of tangled cords. Additionally, the RV-NB20W and RV-NB20B come equipped with USB ports and auxiliary inputs, allowing for versatile playback from different sources.

A standout feature of the RV-NB20 series is the inclusion of a CD player, which appeals to users who still enjoy physical media. The CD playback capability ensures that older music collections can be enjoyed without the need for digital conversion. Furthermore, the systems have AM/FM radio built-in, offering access to local broadcasts and the ability to capture live events.

Portability is another strong point of the RV-NB20W and RV-NB20B. Both models are equipped with a built-in rechargeable battery that offers hours of playback time, making them ideal for picnics, beach outings, or any outdoor activities. The rugged construction of the units also ensures durability, standing up to the rigors of travel.

In terms of design, the RV-NB20W boasts a sleek white finish, while the RV-NB20B features a classic black look. Both options are aesthetically pleasing and will complement various environments. Additionally, the intuitive controls and LED display make it easy to navigate between functions and settings.

In summary, the JVC RV-NB20W and RV-NB20B are feature-rich portable audio systems that successfully blend sound quality, versatility, and convenience. With their array of connectivity options, robust audio performance, and user-friendly design, these models are perfect for anyone looking to enhance their music experience, whether at home or on the go.
Top Page Image Contents