Turning off the sound temporarily
Using the remote control only
Press MUTING.
“MUTING” appears on the display.
On remote control
To restore the sound, press MUTING again or adjust the volume (see page 7).
Adjusting the super woofer volume
During play, you can adjust the bass level between BASS 1 (minimum) and BASS 6 (maximum).
Using the system
Turn the SUPER WOOFER VOLUME +/– control clockwise to increase the bass level or turn it counterclockwise to decrease the bass level.
Using the remote control
Press SUPER WOOFER VOLUME + to increase the bass level or press SUPER WOOFER VOLUME – to decrease it.
Note: This function is not effective when the headphones are in use.
Activating clear sound
The Active Clear Sound (ACS) circuit emphasizes
Press ACS (active clear sound) to turn it on or off.
When it is turned on, the ACS ON indicator lights in red.
or
On system | On remote control |
•The ACS LEVEL indicator flashes in green according to the input signal level.
Selecting the sound mode
Sound modes can be selected to enhance the type of music being played.
Press SOUND to select the sound mode.
Each time you press the button, the sound mode changes as follows:
or
On system | On remote control |
Sound mode selection:
BEAT: Set to this position for music with a heavy beat, such as rock and disco music.
POP:Set to this position for light music including popular and vocal music.
CLEAR: Set to this position for crisp and clear sounding music with transparent highs.
FLAT (no effect): Set to this position not to apply any sound mode.
Showing the time
While the power is turned on, you can see the current time (clock) at any time, as follows.
Using the remote control only
Press DISPLAY.
Each time you press the button, the display changes as follows:
Current sound source (e.g. FM103.50 MHz) O (clock)
Note: To let the clock work, you need to set the clock first. (See “Setting the clock” on page 15.)
8