VTech Home Edutainment System manual Troubleshooting, Problem Solution

Page 17

 

TROUBLESHOOTING

 

 

Problem

Solution

There is no

1. Make sure that the V.FLASHTM, TV and VCR (if used) are plugged

picture on the

into power outlets.

TV screen.

 

2. Make sure that the DC jack on the AC Adaptor is firmly plugged into

 

 

the DC input connector on the back of the Main Unit.

3.Make sure that V.FLASHTM is turned ON and the TV and VCR (if used) are turned ON.

4.Check the connections between the console and the TV or VCR (if used) and review the appropriate connection in this manual.

5.Make sure that all cable connectors are securely plugged into the appropriate sockets.

6.Make sure that the TV is tuned to the appropriate input channel.

No sound on

1. Check if the TV volume is turned off or muted.

TV

 

 

 

2. Try to increase the volume by pressing the Volume + button while

 

 

 

 

playing an audio CD.

 

 

 

 

 

3. Make sure that there are no headphones plugged into the

 

 

V.FLASHTM Main Unit.

 

 

 

 

 

4. Check the audio and video connections between the V.FLASHTM

 

 

and the TV or VCR (if used).

 

 

 

 

 

5. Make sure that the TV is tuned to the appropriate input channel.

 

 

Power Indicator

1. Make sure the AC Adaptor is plugged into both the wall outlet and

does not turn ON

the back of the Main Unit.

when pressing

2. If the light is still off, remove the AC Adaptor plug from the adaptor

ON button, or it

jack of the Main Unit, wait for 1 minute and then plug it back into the

goes OFF during

adaptor jack. Wait for a few seconds, then press the ON button.

gameplay

 

 

 

 

3. If the light is still Off, press the RESTART button and wait for a few

 

 

 

 

seconds, press the ON button again.

 

 

 

 

 

4. Remove all controllers and accessories (e.g. V.FLASHTM MEMORY

 

 

CARD) and remove the V.DISC™, then repeat the procedures

 

 

above. If it is OK, it may be a problem with the V.DISCor accesory.

 

 

Try replacing the Controller, V.DISC™, or accesory.

 

 

Picture is rolling

1. Try to adjust the vertical or horizontal hold controls (if available)

or has bars or

on your TV.

lines

 

 

 

 

Sound is buzzing

1. If using the Stereo AV Cable, check the audio (red & white)

 

 

connections. Make sure they are plugged into the “Input” connectors,

 

 

not the “Output” connectors and make sure the video (yellow)

 

 

connector is not plugged into an audio connector.

 

 

 

The V.FLASH

TM

1. Make sure the power is OFF before plugging any Controller into

 

the console.

Controller does

2. Insert the Controller Plug completely into the Player 1 or Player

not work properly

 

 

2 Port on the front of the console. In some games, it only works

 

 

when the Controller is plugged into the Player 1 Port, so check to

 

 

make sure this connection is made.

3.Make sure that the joytsick on the Controller is centered when the unit is turned on.

TROUBLESHOOTING

14

Image 17
Contents Page Page Accessing the Main Menu ContentIntroduction Package contentsRestart button Product FeaturesMemory Card slot Controller portEnter button Volume buttonSelection buttons Getting StartedGetting Started For TVs with a mono audio input Connecting to a TVFor TVs with stereo audio inputs Connecting the V.FLASHTM Controller Connecting to a VCRTo Change a V.DISC System OperationTo Begin Play To Stop AN Audio CD To Play AN Audio CDIcons Function Application Screen Accessing the Main MenuAccessing the Main Menu Flashtm Memory Card Management Flashtm CD Player Flashtm Media Player Troubleshooting Care & MaintenanceCare & Maintenance Problem Solution TroubleshootingTechnical Support Technical SupportDisclaimer and Limitation of Liability Other InfoOther Info VTech