NordicTrack NTL19010.0 Percent. Then, unplug the power cord, Screws and then tighten them

Page 12

10. See page 14 and plug in the power cord. Next,

10

 

see page 16 and turn on the power. Then, touch

 

 

 

the Incline button numbered 40 on the console.

 

58

The Frame (58) will adjust to an incline of 40

 

percent. Then, unplug the power cord.

 

 

Identify the Left Inside Cover (110) and the Left

 

 

Outside Cover (106). Next, hold the Left Inside

 

 

Cover against the left Upright (77). Then, hold

 

 

the Left Ouside Cover against the Left Inside

 

 

Cover.

 

 

Attach the Left Outside Cover (106) to the Left

36

77

Inside Cover (110) with a #8 x 1 1/4" Screw (36)

 

and two #8 x 3/4" Screws (1). Start all three

 

 

Screws and then tighten them.

 

106

Attach the Right Inside Cover and the Right

 

 

110

Outside Cover (not shown) as described

1

above.

 

11.Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 29 and 30). To pro- tect the floor or carpet from damage, place a mat under the incline trainer.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents QUESTIONS? Model No. NTL19010.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page BEFORE YOU BEGIN Part Identification Chart Assembly Make sure that the power cord is unpluggedSee the inset drawing. Tie the wire tie Screws, and then tighten them. Be careful Tie Pulse Wire Console Assembly Wire Tie 101 102 103 Right Upright 77. Make sure that no wires are Console Base 87. Do not overtighten ScrewsStar Washers 8. Note Start the lower Screw First Upright 77. Make sure that no wires are Washers 8. Note Start the lower Screw firstPercent. Then, unplug the power cord Screws and then tighten themAttach the Right Inside Cover and the Right HOW to PUT on the Heart Rate Monitor Care and MaintenanceTroubleshooting Chest Heart Rate MonitorOperation AND ADJUSTMENT HOW to Plug in the Power CordDiagram Features of the ConsoleConsole HOW to Turn on the Power HOW to USE the Touch ScreenHOW to SET UP the CONSOLE  Connect to your wireless network Check for firmware updatesCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode When you are finished exercising, remove Plug the power cord. Important If you do notKey from the console Do this, the incline trainer’s electrical compoHOW to USE AN Onboard Workout Select an onboard workoutStart the workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Exit the maintenance modeCalibrate the incline system of the incline trainer Find KeycodesHOW to USE the Wireless Network Mode Enable Wi-FiSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Stereo Sound System HOW to USE the Internet BrowserHOW to Move the Incline Trainer Troubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part List Qty DescriptionDescription Exploded Drawing a Exploded Drawing B 106 110 Exploded Drawing D Exploded Drawing E Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

NTL19010.0 specifications

The NordicTrack NTL19010.0, also known as the Commercial 1750 Treadmill, is designed to meet the needs of fitness enthusiasts seeking a premium workout solution. With an array of impressive features and cutting-edge technologies, it stands out in the crowded treadmill market.

One of the standout characteristics of the NTL19010.0 is its robust 3.75 CHP motor, providing a smooth and powerful performance, whether for walking, jogging, or running. This treadmill supports a top speed of 12 mph and a 15% incline, allowing users to simulate real-world running conditions and intensify their workouts.

Another key feature is the 10-inch interactive touchscreen display. This high-definition screen enables users to access a wide variety of workout programs and coaching options through iFit, NordicTrack's subscription-based interactive training platform. With iFit, users can engage in live classes, explore virtual trails around the globe, and receive personalized training plans, all of which enhance the overall training experience.

The NTL19010.0 also incorporates advanced technology for stability and safety. The FlexSelect cushioning system allows users to customize the treadmill’s surface for a firmer feel or softer support, reducing the impact on joints during runs. With a spacious running surface measuring 22 by 60 inches, users of all sizes feel comfortable and supported throughout their workout sessions.

In terms of convenience, the treadmill features built-in Bluetooth speakers, allowing users to listen to their favorite music or podcasts while working out. It also offers multiple USB ports for charging devices, making it easy to stay connected during long training sessions.

Furthermore, the NTL19010.0 is equipped with a foldable frame, making it easier to store after use. The EasyLift assist design aids in lifting the deck with minimal effort, making it an excellent choice for home gyms with limited space.

Overall, the NordicTrack NTL19010.0 Commercial 1750 Treadmill combines powerful performance, advanced technology, and convenient features to deliver a comprehensive training experience suitable for users of all fitness levels. Whether they are seasoned athletes or beginners, this treadmill is engineered to help everyone achieve their fitness goals effectively.
Top Page Image Contents