NordicTrack NTL19010.0 user manual Assembly, Make sure that the power cord is unplugged

Page 7

ASSEMBLY

•Assembly requires two persons.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.

•The underside of the walking belt is coated with high-performance lubricant. After shipping, there may be some lubricant on top of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and a mild, non-abrasive cleaner.

•To identify small parts, see page 6.

•Assembly requires the following tools:

the included hex keys

one Phillips screwdriver

To avoid damaging parts, do not use power tools.

1. Make sure that the power cord is unplugged.

1

 

 

 

Identify the right Upright (77), which has a wire

 

 

tie in it. Hold the Upright near the right side of

 

 

the incline trainer.

 

 

See the inset drawing. Tie the wire tie in the

 

Wire

right Upright (77) around the end of the Upright

 

Tie

Wire (78). Then, pull the other end of the wire tie

 

 

until the Upright Wire is routed out of the top of

 

 

the Upright.

 

 

 

 

77

 

Wire

 

 

Tie

78

 

 

 

78

77

 

7

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model No. NTL19010.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page BEFORE YOU BEGIN Part Identification Chart Make sure that the power cord is unplugged AssemblySee the inset drawing. Tie the wire tie Screws, and then tighten them. Be careful Tie Pulse Wire Console Assembly Wire Tie 101 102 103 Console Base 87. Do not overtighten Screws Right Upright 77. Make sure that no wires areStar Washers 8. Note Start the lower Screw First Washers 8. Note Start the lower Screw first Upright 77. Make sure that no wires areScrews and then tighten them Percent. Then, unplug the power cordAttach the Right Inside Cover and the Right Chest Heart Rate Monitor HOW to PUT on the Heart Rate MonitorCare and Maintenance TroubleshootingHOW to Plug in the Power Cord Operation AND ADJUSTMENTFeatures of the Console DiagramConsole HOW to USE the Touch Screen HOW to Turn on the PowerCreate an iFit Live account HOW to SET UP the CONSOLE Connect to your wireless network Check for firmware updates Calibrate the incline systemHOW to USE the Manual Mode Do this, the incline trainer’s electrical compo When you are finished exercising, removePlug the power cord. Important If you do not Key from the consoleSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Find Keycodes HOW to USE the Maintenance ModeExit the maintenance mode Calibrate the incline system of the incline trainerExit the wireless network mode HOW to USE the Wireless Network ModeEnable Wi-Fi Set up and manage a wireless network connectionHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Move the Incline Trainer Symptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description Part ListDescription Exploded Drawing a Exploded Drawing B 106 110 Exploded Drawing D Exploded Drawing E Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

NTL19010.0 specifications

The NordicTrack NTL19010.0, also known as the Commercial 1750 Treadmill, is designed to meet the needs of fitness enthusiasts seeking a premium workout solution. With an array of impressive features and cutting-edge technologies, it stands out in the crowded treadmill market.

One of the standout characteristics of the NTL19010.0 is its robust 3.75 CHP motor, providing a smooth and powerful performance, whether for walking, jogging, or running. This treadmill supports a top speed of 12 mph and a 15% incline, allowing users to simulate real-world running conditions and intensify their workouts.

Another key feature is the 10-inch interactive touchscreen display. This high-definition screen enables users to access a wide variety of workout programs and coaching options through iFit, NordicTrack's subscription-based interactive training platform. With iFit, users can engage in live classes, explore virtual trails around the globe, and receive personalized training plans, all of which enhance the overall training experience.

The NTL19010.0 also incorporates advanced technology for stability and safety. The FlexSelect cushioning system allows users to customize the treadmill’s surface for a firmer feel or softer support, reducing the impact on joints during runs. With a spacious running surface measuring 22 by 60 inches, users of all sizes feel comfortable and supported throughout their workout sessions.

In terms of convenience, the treadmill features built-in Bluetooth speakers, allowing users to listen to their favorite music or podcasts while working out. It also offers multiple USB ports for charging devices, making it easy to stay connected during long training sessions.

Furthermore, the NTL19010.0 is equipped with a foldable frame, making it easier to store after use. The EasyLift assist design aids in lifting the deck with minimal effort, making it an excellent choice for home gyms with limited space.

Overall, the NordicTrack NTL19010.0 Commercial 1750 Treadmill combines powerful performance, advanced technology, and convenient features to deliver a comprehensive training experience suitable for users of all fitness levels. Whether they are seasoned athletes or beginners, this treadmill is engineered to help everyone achieve their fitness goals effectively.
Top Page Image Contents