4. Install the Seat Assembly
.
Carefully position the seat frame over the seat carriage on the bike frame, aligning the attachment holes in the sides of the seat frame with the holes in the seat carriage.
Using four M10 X 10 socket head screws and four washers, secure the seat frame to the seat carriage. Tighten all four screws securely to a torque of
Verify operation by lifting up the red lever and sliding the seat carriage from the front to the back. Verify the latch engages when the lever is released.
Step 4
NOTE: THIS COMPLETES THE ASSEMBLY OF THE BASE FRAME, TO COMPLETE ASSEMBLY OF LED DISPLAY CONTINUE ON PAGE 15
14 | STAR TRAC E SERIES BIKES OWNER’S MANUAL |