Star Trac E- UB 8100, E- RB 8110 manual ASSEMBLY- LED Display, Install the Rear Display Plastics

Page 15

ASSEMBLY- LED DISPLAY

Your Star Trac Bike will be shipped with the display in a separate carton. This section covers the final assembly of the LED display. If you ordered a Personal Viewing System (PVS) or an embedded computer, please refer to the separate assembly instructions included with those products

1. Install the Rear Display Plastics

Open the separately packaged display and remove the M4 screws from the back plastics, set these aside for additional use. Attach the rear display cover to the display weldment with four M4 screws and four M4 washers included with the display.

Quick Disconnect Ground Tab

Step 1

2. Connecting the Display Assembly

Position the front half of the display plastic in front of the display weldment.

The following display connections will need to be made.

A.Connect the main display cable with a white 9 pin connector to the J4 connector on the display PCB.

B.Connect the contact heart rate cable to the heart rate board

C.Ground wire from the heart rate board must be connected to the quick disconnect tab on the display weldment.

D.Ground wire from the base frame should be connected to the 2nd quick disconnect tab on the display weldment.

A

Step 5

B

NOTE: For the LED display the coax cable is not used and should be replaced into the main neck tube.

Step 2

3. Final Display Assembly

With the electrical connections made you can now attach the display. Next you will need to attach the front of the display to the weldment. First guide the bottom of the display under the front tabs of the weldment and then second you will need to pivot the display forward around the tabs to mate front display plastic to the rear plastic that is attached to the weldment.

Once in place attach the plastics with the M4 screws included with the display. There are 8 M8 screws that attach around the perimeter of the display, secure properly.

STAR TRAC E SERIES BIKES OWNER’S MANUAL

Step 3

15

 

 

Image 15
Contents Star Trac Fitness Series Bikes UB 8100/ E- RB Table of Contents About this Manual IntroductionSafety Instructions Important Safety InstructionsDo Not Mise EN Garde DE Belangrijke Instructies VAN DE VeiligheidWaarschuwing Sparen Deze Instructies Instructions DE Sûreté ImportantesMantenga Queste Istruzioni Wichtige SicherheitsvorschriftenWarnung AttenzioneGuarde Estas Instrucciones Instruções DE Segurança ImportantesAdvertência AdvertenciaAdvarsler Viktiga SäkerhetsanvisningarUppehälle Dessa Anvisningar RådSeries Bike Unpacking Assembly and Setup E-UBAssembly Install the Neck Tube and Display WeldmentInstall the Seat Post Assembly and Setup E-RB Install Adjustable Heart Rate Bar Install the Display WeldmentInstall the Seat Assembly Final Display Assembly ASSEMBLY- LED DisplayInstall the Rear Display Plastics Connecting the Display AssemblyFinal Setup and System Check Operating Instructions Seat AdjustmentsPage Page Page Page Page Page Page Page Page Page Page Page Monthly Maintenance Preventive MaintenanceDaily Maintenance Weekly MaintenancePage Page Page Page European Applications Regulatory InformationFCC and Other Domestic Regulations Canadian DOC and Other International RegulationsStar Trac USA

E- UB 8100, E- RB 8110 specifications

Star Trac has long been a leader in the fitness equipment industry, and its E-RB 8110 and E-UB 8100 models reflect the brand's commitment to innovation, comfort, and performance. These models are designed for users of all fitness levels, providing an engaging workout experience through a blend of advanced technology and user-centric design.

The Star Trac E-RB 8110 is a recumbent bike that emphasizes ergonomic design, promoting effective workouts while prioritizing user comfort. Its low step-through frame facilitates easy access for all users, accommodating a broad range of mobility levels. The bike features a large, adjustable seat with a ventilated backrest to ensure optimal support during extended workout sessions. The console is equipped with a vibrant LCD display that offers real-time feedback on key metrics such as time, distance, calories burned, and heart rate, keeping users informed and motivated.

Meanwhile, the E-UB 8100 upright bike maintains the balance of comfort and performance while promoting an active riding position. This model features an adjustable seat with a cushioned design, allowing users to find their optimal riding position effortlessly. The E-UB 8100 also boasts a user-friendly console with an intuitive interface, offering multiple programs to keep workouts engaging and challenging. Users can easily track their progress thanks to features like integrated heart rate monitoring and customizable workout routines.

Both models utilize advanced resistance technology, ensuring smooth transitions between levels, thus accommodating users as they progress in their fitness journey. Magnetic resistance systems provide a quiet and smooth operation, making workouts enjoyable without the distraction of noisy equipment. The E-RB 8110 and E-UB 8100 are constructed with durable materials designed for rigorous use, ensuring longevity and reliability in a high-traffic gym environment.

Star Trac also prioritizes aesthetics, making these models visually appealing additions to any gym space. Their sleek designs and commercial-grade finishes are engineered to withstand the demands of everyday use while maintaining a modern look that aligns with contemporary fitness trends.

Overall, the Star Trac E-RB 8110 and E-UB 8100 are outstanding choices for fitness enthusiasts seeking reliability, comfort, and cutting-edge technology in their workout routines. These bikes not only enhance user experience but also reflect the brand's commitment to quality and innovation in the fitness industry.