4. Final Setup and System Check
Be sure all bolts and screws are tightened securely per the Owner’s Manual.
Read this manual completely to be aware of all instructions and safety information before using the product for the first time.
To operate the unit, follow the instruction to adjust the seat to the proper height, mount the bike properly and slowly begin pedaling. The LED display should power up after the first few pedals and display instructions on how to begin your workout.
Move the unit to its final place of operation and check to see if the unit is level. If needed, use the four leveling feet to properly level the unit. To do this, rotate the adjusters until the unit is stabilized.
You have now completed the assembly of your Star Trac E- UB / RB.
16 | STAR TRAC E SERIES BIKES OWNER’S MANUAL |