Pre Installation Information
18
To install your machine as POP3 Client, the following network parameters need to be programmed on your
network.
IP Address of the DNS Server (if not available, see Note 2)
IP Address of your machine
Subnet Mask of your machine
Name or IP Address of the Default SMTP mail server
IP Address of the Default Gateway
POP Server Name or IP Address
POP User Account Name
•POP Password
Email Address of your machine (see Note 1)
Email Transmission (from your machine to a PC)
Email reception (from a PC to your machine)
NOTE 1. The email address format can be the same as your regular email address. If your email
address is popuser001@panasonic.com, your machine's email address can be
Internet_Fax@panasonic.com.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names. If the DNS Server is not available, change the Fax
Parameter No. 161 (DNS SERVER) to "1:Invalid". Then the machine will prompt you to enter
the IP Address of the SMTP and POP Servers.

Setup as POP3 Client

ifaxuser@fax01.panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
Router(Gateway)
popuser001@panasonic.com
SMTP
POP3
ifaxuser@panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
(POP Server)
Router(Gateway)
popuser001@panasonic.com
SMTP
POP3