Panasonic DX-600 Sending Documents via LAN, Manual Email Addressing, Set documents face down

Sending Documents via LAN

Manual Email Addressing

1

2		Set document(s) face down.
	EMAIL	To choose Manual Email Addressing mode.

3a Enter the full email address using the Character keys (up to 60 characters).

Ex: a b c p a n a s o n i c c o m

If you make a mistake, press CLEAR to erase the character then re-enter the correct character.

3b Enter the User portion of the email address and press SET . The machine will complete the email address with the Default Domain preprogrammed in the User (Internet) Parameters. (i.e. will add "panasonic.com" to

the email address)

ENTER STATION(S) THEN PRESS START 00%

❚

ENTER EMAIL ADDRESS

abc@panasonic.com

abc

Basic Operations

3c If you want to send to a different Domain, enter the first

part of an email address, press and use the

or key to display domain names in the Selectable Domains List. Choose the desired domain and press

START . (See Note 3 and page 99)

abc@mgcs.com

4

The document(s) is stored into memory with a file number. Then connects to the LAN and starts sending the email message.

* STORE * NO.001

PAGES=001 01%

*STORE * COMPLETED TOTAL PAGE=005 25%

ON LINE * MEM.MXT * ID:abc@panasonic.com

NOTE	1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialler is Full
	(more than 70 full email addresses are entered or 70 transmission reservations including G3
	communication have been already reserved).

2.If the transmission cannot be completed for any reason, the email may be returned undelivered; otherwise no reply will be printed.

3.For the machine to perform the email address completion the Fax Parameter No. 160 (DEFAULT DOMAIN) must be set to "Valid" and the DEFAULT DOMAIN must be preprogrammed in the User (Internet) Parameters. (See page 50)

91