Panasonic DX-600 appendix Using a PC to Update the Auto Dialler Remotely

Programming or Retrieving Parameters via Email

Using a PC to Update the Auto Dialler Remotely

This feature provides a convenient and an easy way to Update, Backup or Restore the Phone Book data right from your PC by sending a text email message to your machine.

Your machine interprets the command that you enter in the "Subject" line of your email message and performs one of the following functions, it Retrieves or Stores data into the Auto Dialler (Phone Book).

The two types of commands that can be entered in the "Subject" line of your email:

1)	To Store	:	#set abbr(password)#	: where the "password" is the Remote Password programmed in
	data, type			your machine's User Parameters (i.e. 123456789).
				You can program any known unused Auto Dialler location(s)
				with this command for the first time, without having to Retrieve
				the Phone Book data first. If the desired Auto Dialler location
				already contains data, your machine will overwrite the existing
				data, therefore, we recommend that you use the Retrieve
				command below instead.
				To edit existing Auto Dialler locations, refer to pages 66 to 67.
2)	To Retrieve	:	#get abbr(123456789)#
	data, type

NOTE

1.To activate this feature, change the Fax Parameter No. 158 (PC REMOTE UPDATE) to "Valid". (See page 83)

60