Panasonic DX-600 appendix 105, Sending Documents via Telephone Line, Memory Transmission

Sending Documents via Telephone Line

Memory Transmission

Your machine quickly stores the document into the machine's memory. Then, starts to dial the telephone number.

If the transmission fails, your machine will re-transmit the remaining unsuccessful page(s) automatically.

1

Store document

in memory

A

2

Transmit

Destination A

Destination B

3

Receive

A

A

Basic Operations

NOTE

1.The File Number of the document being stored is shown at the upper right corner of the display while storing the document. It is also printed on the Communication Journal (COMM. JOURNAL), Transaction Journal and File List. The percentage of memory used is shown on the lower right corner of the display after each page is stored.

* STORE * NO.003

PAGES=002 10%

*STORE * COMPLETED TOTAL PAGES=005 30%

2.If memory overflow occurs while storing documents, the remaining documents on the ADF will be ejected. The machine prompts you whether to transmit the successfully stored documents or to cancel the transmission. Press 1 to cancel or press 2 to transmit.

MEMORY OVERFLOW INFO. CODE=870

See the Specifications on page 239 for the image memory capacity.

If no action is taken within 10 seconds, the machine will start transmitting the stored documents.

15 PAGES COMPLETED DELETE? 1:YES 2:NO

3.An Information Code will be displayed if the transmission has failed or no answer at the receiving side after the last automatic redial.

The document stored for this transmission will be erased from the memory automatically and the information code is printed for the transmission on the Communication Journal (COMM. JOURNAL).

If you need to retain the incomplete documents even after the last redial, change Fax Parameter No. 31 (INC. FILE SAVE) to "Valid" in advance. (See page 80) To retry the incomplete documents, refer to page 167.

INCOMPLETE INFO. CODE=XXX

105